Home / Services / Miami
Miami, FL

Structural Engineer in Miami, FL: Structural and MEP Design

Chrome Stone Structural is a structural and MEP engineering firm with its Florida office in Miami, on Biscayne Boulevard. Our engineering team prepares permit drawings for Miami-Dade and Broward projects designed for the High-Velocity Hurricane Zone, from renovations and canopies to restaurant tenant improvements.

Restaurant interior with order counter and kitchen in Madera, California
Chrome Stone project · Madera, CA

Need HVHZ wind design, NOA coordination or condo repair drawings in Miami-Dade? Send the address and plans for a quote.

Founded 2025 · 14 years of team engineering experience · Structural, MEP and wind design in one team · California and Florida

  • Structural, MEP and wind designOne team for the whole permit set
  • Engineers serving California and FloridaCalculations and drawings prepared for permit review
  • Local permit drawingsPrepared for the City of Miami and Miami-Dade County
  • Projects across CA, FL and beyondView our projects →
  • Who it fits: homeowners, condominium associations, contractors, architects and business owners in Miami-Dade and Broward.
  • Documents we deliver: structural and MEP calculations and permit drawings, including HVHZ wind pressures, plus plan review responses.
  • Inputs we need: the address and city, existing drawings or a sketch, photos of the area, and a short description of the work.

Chrome Stone Structural is a structural engineer in Miami, with MEP engineering in the same team. We prepare the calculations and drawings that the City of Miami Building Department, Miami-Dade County and the other South Florida building departments review for permit, designed for the High-Velocity Hurricane Zone.

We work with homeowners, condominium associations, contractors, architects and business owners across Miami-Dade and Broward, and we stay available while the project is built.

Engineering Services in Miami

  • Structural engineering: additions and renovations, removed load-bearing walls, roof framing, canopies, screen enclosures, retaining walls and foundations.
  • Wind load design: wind pressure calculations, uplift connections, rooftop equipment anchorage and design pressure schedules for windows and doors.
  • Commercial structural work: tenant improvements, roof reinforcement and supports for rooftop mechanical equipment and kitchen hoods.
  • MEP engineering: HVAC, electrical and plumbing design for restaurants, retail shops, offices and residential projects.

Designing for Miami Projects: the HVHZ

Miami-Dade and Broward counties are in the High-Velocity Hurricane Zone (HVHZ) of the Florida Building Code. Projects here are designed for some of the highest wind pressures in the country, with stricter requirements for the structural design, the load path from roof to foundation and the products used in the building envelope. We prepare the structural set with those requirements in mind and coordinate rooftop equipment anchorage with the MEP design. South Florida’s heat and humidity also make HVAC sizing and moisture control an important part of MEP work.

In practice, HVHZ design shows up in many small details of a Miami permit set: roof sheathing and nailing schedules, hurricane straps and anchors at every truss or rafter, tie-downs for canopies and screen enclosures, and anchorage for condensing units and exhaust fans on the roof. For a deeper look at the rules, read our HVHZ article for Miami-Dade and Broward or see our wind load and HVHZ design service.

Flood Zones on Miami-Dade Sites

On many Miami-Dade sites, flood elevation shapes the foundation of a new building or an addition as much as wind does. The County’s online flood zone tool shows the FEMA flood zone for an address. The County also notes that FEMA published preliminary flood maps in 2021 that are not yet in effect, so the maps that took effect on September 11, 2009 still apply.

For a building in a special flood hazard area, the flood zone and the base flood elevation set the lowest floor, the foundation type and where mechanical and electrical equipment can sit. See our article on what the code requires in flood zone AE. Large improvements to an existing building can bring the same rules into play, as the substantial improvement question in the FAQ below explains.

Miami Building Departments and Product Approvals

Which office reviews your plans depends on where the property is. Projects inside the City of Miami go to the City of Miami Building Department. Unincorporated areas of the county, such as Kendall and much of west Miami-Dade, are reviewed by the Miami-Dade County building department. Coral Gables, Miami Beach, Hialeah, Doral, Homestead and the other incorporated municipalities each run their own building department, with their own submittal portals and review comments.

The county’s own process, with an online portal and electronic plan review, applies to unincorporated properties. Under section 553.791 of the Florida Statutes, which Miami-Dade County cites, an owner may also choose a private provider for plan review by notifying the building official in writing at the time of application. Whichever review path is used, our structural and MEP drawings follow the same Florida Building Code and HVHZ requirements.

In the HVHZ, windows, doors, storefronts, shutters, skylights, roofing and other exterior products must be approved for HVHZ use, usually through a Miami-Dade Notice of Acceptance (NOA) or a Florida Product Approval approved for the HVHZ. Our drawings show the wind design data and the component and cladding pressures by zone that the Florida Building Code requires, so we list the required pressure for each opening. We then check each proposed product’s design pressure rating, tested size, impact rating and anchorage details against the opening it will fill. Where the actual substrate or a larger opening falls outside the approval, we design the anchorage or the supporting framing. Coordinating these numbers early keeps the drawings and the product approvals consistent for plan review. See our HVHZ wind design article.

Repair Drawings After an Engineer’s or Milestone Report

Older buildings in Miami-Dade go through the county’s building safety inspection program, which the county has run since 1975 and amended on June 1, 2022, alongside the state’s milestone inspection law for condominium and cooperative buildings. According to the county:

  • Most buildings built on or after 1993 need an inspection when they reach 30 years, and every 10 years after that.
  • Coastal condominium and cooperative buildings three stories or taller, within three miles of the coastline and built on or after 1998, need their first inspection at 25 years, then every 10 years.
  • Exempt: single-family homes, duplexes, and small buildings with an occupant load of 10 or less and 2,000 square feet or less.
  • The process starts with a county notice. The owner then has the building inspected and submits the structural and electrical reports by the deadline in the notice.

The inspection is carried out by the engineer or architect the owner or association hires for it. Our article on what a structural inspection in Florida covers explains the process. Chrome Stone’s role starts after the report: we review its findings, ask for any measurements or photos the design depends on, and prepare the structural repair drawings, calculations and permit documents the building department reviews.

Typical repair packages cover concrete spalling and exposed reinforcing, balcony and walkway slabs, columns and beams, railings and their anchorage, and roof framing. Where the extent of damage cannot be measured until demolition, we set up the drawings so a contractor can price the work by unit and we can adjust details as conditions are uncovered. Under the milestone law, repairs for substantial structural deterioration must be commenced within the period the law sets after the building department receives the phase two report, so we plan the permit set around that date. During construction, we answer the contractor’s questions and update the design when opening up the structure shows conditions the report could not see. Our article on what happens after a milestone inspection explains how the state and county programs fit together and the deadlines.

Is That Crack Structural?

Cracks are among the most common reasons Miami owners look for a structural engineer. Many are cosmetic: thin shrinkage cracks in stucco or drywall that do not grow. Others point to a structural problem, such as settlement under a footing, corroded reinforcing pushing concrete apart, or an overloaded beam. Cracks that keep widening, stair-step cracks in block walls, cracks wider at one end than the other, rust stains or loose concrete, sloping floors, and doors or windows that start to stick all deserve a closer look.

When a crack needs a structural repair, we design the repair, such as new reinforcing, concrete repair or a foundation repair, and prepare the drawings for the permit.

Unsafe Structure Cases in Miami-Dade

Miami-Dade County’s Unsafe Structures Board reviews Building Official decisions on buildings considered unsafe, and in the unincorporated area single-family homes and duplexes go to a separate Unsafe Structures Appeal Panel. When the owner chooses to repair, an engineer can prepare structural repair drawings from the photos, drawings and reports the owner sends, so the permit application shows how each listed problem will be fixed. Check the notice for the department and board named on it.

Historic Properties in the City of Miami

Repairs and renovations to properties designated as historic in the City of Miami need preservation approval in addition to the building permit. The City recommends speaking with preservation staff early about a proposed project.

For structural work, the repair or strengthening design has to respect the protected exterior. New connections, framing or steel can often be placed where they are not seen, and original materials can be kept where possible.

Homeowners, Associations and Property Managers

We work with single-family homeowners on renovations, wall removals, crack repairs and additions, and with condominium associations and property managers on repair drawings after milestone and county inspection reports and on building-wide upgrades. Associations usually need repair drawings that several contractors can bid and help answering residents’ questions. Homeowners usually need a clear answer to one question and a permit set prepared for the building department’s review.

What to Have Ready Before You Call

  • The property address and the building department it falls under (we can confirm it).
  • Any existing drawings, surveys or earlier inspection reports.
  • For an older building: the county’s notice and the inspection report.
  • Photos of the problem area, such as cracks, rust stains or loose concrete.
  • A short description of what you want to change or repair.

The Roofing Permit Package in Miami-Dade

Miami-Dade County publishes checklists, forms and standard details for roofing work. Every roofing permit starts with the Uniform Roofing Permit Application. Sections A and B ask for general information, the roof category, roof type, roof system information and a roof plan. Separate sections then cover each system, such as built-up, single-ply, shingle, metal and tile roofs, with a tile calculation section and a ridge ventilation calculation form.

When the roof of an existing home is replaced, the County’s hurricane mitigation forms come into play. They cover the roof decking attachment and a secondary water barrier, and the roof-to-wall connections, or an owner’s exemption from that step. Where the existing deck, rafters or trusses are damaged, or a heavier roof covering such as tile goes on, an engineer can design the repair and the connections for HVHZ wind loads from the photos, drawings and reports the owner sends. Cities in Miami-Dade run their own building departments, so check the city’s own roofing requirements too.

MEP Design for Miami’s Climate

Air conditioning runs most of the year in Miami, so MEP design here is as much about humidity as temperature. We size cooling equipment for both the sensible and latent load, plan outside air so a space stays dry, and route condensate drains so they do not cause problems in ceilings and walls. Restaurants add exhaust hoods and make-up air that have to be balanced against the cooling system.

Hurricane season shapes the electrical and plumbing design too. Owners often ask for standby generators or transfer switches, and in flood zones the electrical panels, condensing units and water heaters may need to sit above the design flood elevation. Rooftop equipment needs anchorage that is designed for the same HVHZ wind pressures as the building itself, so the structural and MEP drawings are coordinated from the start.

Typical Miami Project Types

  • Older homes and duplexes: opening up interior walls, adding a room or second floor, and replacing or reinforcing roof framing on houses built before current wind provisions.
  • Condominium and multi-story buildings: structural repair drawings and permit documents after Miami-Dade building safety inspection or Florida milestone inspection reports for condominium buildings.
  • Restaurants and retail: tenant improvements in Wynwood, Brickell, Little Havana and the Design District, with new kitchen hoods, rooftop units and plumbing for food service.
  • Outdoor structures: aluminum and steel canopies, pergolas, screen enclosures and pool decks that have to resist HVHZ wind uplift.
  • Waterfront work: retaining walls and foundations near the bay and canals, where flood zones affect the foundation and the elevation of equipment.

Outside South Florida, our page on structural and MEP work in Tampa Bay covers projects in Hillsborough and Pinellas counties.

Areas We Serve in South Florida

From the Biscayne Boulevard office we take projects across Miami-Dade County, including Downtown Miami, Brickell, Edgewater, Wynwood, Little Havana, Coconut Grove, Coral Gables, Miami Beach, North Miami, Hialeah, Doral, Kendall and Homestead. In Broward County we work in Fort Lauderdale, Hollywood, Pembroke Pines and the surrounding cities, and we also take projects in Palm Beach County and elsewhere in Florida; see our Florida structural engineering page.

Florida Project Example

Our Florida project example is in Gibsonton, in Hillsborough County on the Gulf side of the state: the MEP design for a 796 sq ft retail space turned into an ice cream shop. Its HVAC design accounted for the heat given off by the refrigerated display counters in a small shop with seating. Read the project article.

What You Receive

  • Calculations and drawings for the structural or MEP scope of the project, including HVHZ wind pressures where they apply.
  • Permit documentation from an engineer.
  • Plan review responses when the City of Miami, Miami-Dade County or another municipality returns comments.
  • Construction-stage support for contractor questions, product substitutions and field changes.

How It Works

  1. Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
  2. We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
  3. Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
  4. Plan check and construction supportWe answer plan-check comments and support your contractor during construction.

Nearby areas: we also prepare structural and MEP drawings for projects in Fort Lauderdale, West Palm Beach and Southwest Florida.

Our Miami Office

Chrome Stone Structural
2125 Biscayne Blvd, Ste 204, Miami, FL 33137
Phone: +1-279-221-5279
Monday to Friday, 9am to 5pm

Frequently Asked Questions

Where is your Miami office?

Our Florida office is at 2125 Biscayne Blvd, Ste 204, Miami, FL 33137.

Is my Miami project in the High-Velocity Hurricane Zone?

If the property is in Miami-Dade or Broward County, it is in the HVHZ under the Florida Building Code, and the structural design and exterior products have to meet the HVHZ requirements.

What is a Miami-Dade NOA and do I need one?

A Notice of Acceptance (NOA) is Miami-Dade County’s product approval for exterior building products such as windows, doors, shutters and roofing. In the HVHZ, those products need an NOA or another approval accepted for the HVHZ, and they must meet the design pressures shown on the engineer’s drawings.

Which building department reviews my plans in Miami-Dade?

It depends on the address. The City of Miami reviews projects inside city limits, Miami-Dade County reviews unincorporated areas, and cities such as Coral Gables, Miami Beach and Hialeah have their own building departments.

Can you help with a load-bearing wall removal in a Miami home?

Yes. We size the new beam and posts, check the load path down to the foundation and prepare the drawings for permit. Our article on removing a load-bearing wall in Florida explains the steps.

What do you need from me to prepare a quote?

The project address city, the drawings or a sketch with dimensions, photos of the existing structure for renovations, and a short description of the work.

Which Florida Building Code edition applies to my Miami permit?

The 8th Edition (2023) Florida Building Code applies today. Under Florida law, the edition in effect on the date of the permit application governs the permitted work for the life of the permit, so we confirm the edition when you apply. Our 9th Edition article explains what changes.

Does the 50% rule apply to my Miami home?

Only if the building is in a FEMA special flood hazard area. There, if the repairs or improvements equal or exceed half of the building’s market value, or the stricter threshold your city uses, the building must be brought up to current flood requirements. The local floodplain administrator makes the determination. Our article on Florida’s 50% rule explains the calculation.

Do you work in Coral Gables, Miami Beach and Hialeah?

Yes. Each of those cities runs its own building department, separate from the City of Miami and Miami-Dade County. We prepare the drawings for the department that reviews your address and answer its comments.

How do I know if a crack is structural?

Cracks that keep widening, stair-step cracks in block walls, cracks wider at one end, rust stains or loose concrete, sloping floors and sticking doors are signs that the structure needs a closer look. Thin cracks that do not grow are often cosmetic.

Which buildings fall under the county’s building safety program in Miami-Dade?

Buildings built on or after 1993 need it at 30 years and every 10 years after; older buildings follow the county’s earlier schedule. Single-family homes, duplexes and small buildings of 2,000 square feet or less with an occupant load of 10 or less are exempt.

When is a coastal condominium’s first milestone report due?

Condominium and cooperative buildings three stories or taller, within three miles of the coastline and built on or after 1998, need it at 25 years, then every 10 years.

Can you prepare repair drawings after the engineer’s report?

Yes. The inspection is done by the engineer or architect the owner or association hires for it. We prepare the structural repair drawings, calculations and permit documents for what the report identifies.

Do you work with homeowners or only associations?

Both. We work with homeowners on single projects and with associations and property managers on repair drawings and building-wide upgrades.

What design wind speed applies to buildings in Miami?

Miami-Dade is in the High-Velocity Hurricane Zone, which uses a single design wind speed for the whole county for each risk category. For ordinary buildings, such as homes and most commercial buildings (Risk Category II), that speed is 175 mph. Higher risk categories use higher speeds. The Florida Building Commission notes that peninsula wind speeds have not changed since the 2010 code. The design pressures on the drawings start from this value; see our wind load and structural design services.

Which work is exempt from a building permit in Miami-Dade?

Miami-Dade County lists permit exemptions for unincorporated areas, based on the Florida Building Code. The City of Miami publishes its own list. Both make clear that exempt work must still follow the building code. The county lists structural work, including windows, doors, wind-resistant fences and sheds, as work that still requires a permit. A state law in effect from July 1, 2026 adds exemptions for some minor residential work, but not for structural, electrical, plumbing, mechanical or gas work. If your property is inside a city, check with that city’s building department.

Is Miami 21 the building code?

No. Miami 21 is the City of Miami’s zoning code. It sets standards and procedures for new development and redevelopment, and its Atlas assigns a transect zone to every property in the city. The Florida Building Code covers how the building is designed and built. A project in the City of Miami has to satisfy both: zoning for what can be built and where, and the building code for the structure and its systems.

Does a standby generator need a permit in Miami-Dade?

Yes, when it stays permanently outdoors. Miami-Dade County requires a building permit to place and keep a generator permanently in an outside location. Its checklist asks for a site plan with the distances to existing buildings and property lines, a generator anchoring detail for the pad, and placement above the required flood elevation. In a city, the municipal building department handles the permit. We prepare the electrical and structural drawings; see our MEP engineering services in Florida.

Does a shed or a wind-resistant fence need a permit in Miami-Dade?

Miami-Dade County lists sheds and wind-resistant fences as structural work that still requires a permit. Both have to resist the high design wind pressures of the High-Velocity Hurricane Zone, so the permit drawings show how the structure and its anchorage carry those loads. Our article on HVHZ structural design in Miami-Dade and Broward explains the rules behind this.

Sources

Call Chrome Stone
Request a Quote

Request a Quote for Miami

Tell us the project address and city, the type of work and what the building department is asking for.

  • Project city and state
  • Building type and proposed work
  • Required engineering disciplines
  • Architectural or existing-condition drawings available

Prefer to call? +1-279-221-5279


    We will use this address to respond to your inquiry.


    Add it if you prefer a call back.


    City only. A full property address is not needed for this first inquiry.

    Engineering support needed

    California Title 24 applies to California projects only.


    Briefly describe the building, proposed work, and any questions. Do not include passwords, payment details, or confidential documents.

    Add project stage or other details (optional)


    Leave blank if unknown.


    Tell us what the date relates to. The team will confirm feasibility after reviewing the scope.

    We use these details to review and respond to your inquiry. Read our Privacy Policy.

    While we review your project, follow Chrome Stone Structural on LinkedIn for new projects and code updates. Follow us on LinkedIn