Chrome Stone Structural is a structural engineer for projects in Orlando, Orange County and across Central Florida, with MEP engineering in the same team. We prepare the calculations and drawings that the City of Orlando, the Orange County Division of Building Safety and the other local building departments review for permit, and we stay available while the project is built.
We work with homeowners, contractors, architects and business owners across Central Florida, from block-home renovations and pool enclosures to restaurant build-outs.
Engineering Services in Orlando
- Structural engineering: additions and renovations, removed load-bearing walls, roof framing, canopies, pool and screen enclosures, and foundations.
- Wind load design: wind pressure calculations, uplift connections, rooftop equipment anchorage and design pressure schedules for windows and doors.
- Commercial structural work: tenant improvements for restaurants, retail and offices, roof reinforcement and supports for rooftop equipment and kitchen hoods.
- MEP engineering: HVAC, electrical and plumbing design for commercial tenant improvements and residential projects.
Designing for Central Florida Projects
Central Florida is inland, but hurricanes still bring design wind speeds that control the lateral design of most buildings, so the roof-to-foundation load path and uplift connections are part of every structural set. Hurricane Ian in 2022 and Hurricane Milton in 2024 both crossed the region with damaging winds and heavy rain, a reminder that the wind provisions of the Florida Building Code apply well away from the coast. Miami-Dade and Broward are the only counties in the High-Velocity Hurricane Zone; our page on Miami structural and MEP engineering covers projects there.
Parts of the region also have soils prone to sinkholes, which makes the soils information available for a site an important input to foundation design. The limestone under much of Orange, Seminole and Lake counties can dissolve over time, and Winter Park’s well-known 1981 sinkhole is still cited as an example of what can happen. For new foundations and larger additions we rely on a geotechnical report where one is available, and we tell you early when we think the site needs one.
Many Central Florida homes are built with concrete block walls, a bond beam at the top and wood roof trusses above. Cutting a new door or window into a block wall, or enlarging an opening, needs a lintel or beam designed for the load above, and the filled and reinforced cells around the opening have to keep the uplift path to the foundation continuous. We detail those changes so the contractor knows exactly which cells to fill and where the new reinforcing goes.
Storm Repairs and Permits in Orange County
After a hurricane, Orange County separates repairs that need a permit from those that do not. Roof repairs and replacements, including the sheathing and structural parts, need a permit, and so do structural repairs to walls, beams, foundations or trusses. Minor cosmetic repairs, temporary protection such as tarps or boarded windows, and replacing broken glass in an existing frame without changing its size or type do not.
For structural repairs, the drawings show how the damaged members are replaced or strengthened and how the roof, walls and foundation are tied together again for the wind loads that apply to the site.
Flood Zones in Unincorporated Orange County
In unincorporated Orange County, a building permit for a property in a flood zone also needs a floodplain permit before it can be approved. For residential buildings in the floodplain, the County’s rules call for the lowest floor, the servicing equipment and the garage slab to sit at or above the base flood elevation plus one foot. Our article on building in flood zone AE in Florida explains the ways to elevate a building.
When a building in a FEMA flood zone is damaged or improved, the County’s Stormwater Management Division decides whether the work is a substantial improvement or substantial damage under the County’s floodplain ordinance. If it is, the building has to meet current floodplain requirements, which can change the scope of an addition or a repair.
Reroofing Older Homes in Orange County
Orange County publishes a re-roofing checklist for site-built single-family homes. It starts with one question: was the house permitted on or after March 1, 2002, under the Florida Building Code? If so, the checklist notes that its extra re-roofing steps do not apply. For an older home, it asks for two upgrades when the roof covering is replaced:
- Roof deck nailing: plywood or OSB decking attached with 8d nails at 6 inches apart already complies. Decking that is not nailed that way must be re-nailed with 8d ring shank nails at 6 inches apart.
- Secondary water barrier: one of five listed methods, such as self-adhering tape over all joints and seams of the roof deck, or a full self-adhering or felt underlayment installed as the checklist describes.
Inside the City of Orlando and other cities, check the city’s own requirements. Where a reroof uncovers rotted decking or rafters, or the work reaches the connections between the roof and the walls, an engineer can design the repair and the connection details for Central Florida wind loads.
Using a Private Provider in the City of Orlando
Section 553.791 of the Florida Statutes lets an owner hire a private provider for building code review during design and construction, in place of the local building department. The City of Orlando explains that private providers must be architects, engineers or others qualified under Florida law, and that their work is limited to building code compliance. It cannot include review for fire protection and fire safety, site work, zoning, land use, floodplain and other City codes.
The process starts with registering the private provider firm with the City. A Notice to Building Official is then filed for each master or stand-alone permit, and plans are submitted digitally through the City’s ProjectDox system. A private provider changes who reviews the drawings, not what they must show, so the structural and MEP drawings still have to meet the Florida Building Code in full.
Orlando-Area Building Departments
Properties inside Orlando city limits, including Downtown, College Park, Thornton Park, Baldwin Park and Lake Nona, are reviewed by the City of Orlando’s permitting services. Unincorporated Orange County, which includes Dr. Phillips, Pine Hills, Azalea Park and much of the tourist corridor, goes to the Orange County Division of Building Safety. Winter Park, Maitland, Winter Garden, Ocoee and Apopka have their own departments, as do Kissimmee and Osceola County to the south and Sanford, Oviedo, Altamonte Springs and Seminole County to the north.
Each jurisdiction uses the Florida Building Code, but submittal portals, checklists and review comments differ. We prepare the structural and MEP sets for the department that will review them and answer plan review comments in writing.
Restaurants, Retail and Hospitality
Orlando’s tourism economy means a steady flow of restaurant, retail and entertainment build-outs along International Drive, near the theme parks and in suburban shopping centers. These tenant improvements usually combine several trades: a new kitchen hood and make-up air, grease waste plumbing, a larger electrical service, new rooftop units and the steel or wood framing needed to support them on an existing roof. Designing structural and MEP in one team keeps those pieces coordinated, so the roof openings, curb locations and unit weights match on every sheet.
Pools, Spas and Screen Enclosures in the City of Orlando
The City of Orlando’s residential pool and spa checklist says a typical pool or spa needs at least three permits: building, electrical and engineering. The engineering permit is generated by City staff as part of the building permit review. A plumbing and gas permit is added for a gas-fueled pool heater or an automatic fill system. The checklist points to the City’s land development code for pools, spas and screen enclosures, Chapter 45 of the Florida Building Code, Residential, and Article 680 of the National Electrical Code.
The site engineering part of the submittal includes a scaled, fully dimensioned site plan that shows the pool and deck layout, separates what is existing from what is proposed, and shows the equipment location. A screen enclosure with a solid roof follows the setbacks of the main house, and a pool or deck raised high enough follows the accessory structure rules. Our drawings cover the pool shell and deck structure, the screen enclosure or solid roof for Central Florida wind loads, and the pool electrical and gas design, from the plans and photos the owner sends.
Accessory Dwelling Units in the City of Orlando
The City of Orlando encourages accessory dwelling units, such as garage apartments, granny flats, in-law suites and backyard cottages. An ADU can be attached to the house, detached, built in or above a converted garage, or set up as a fully separated unit inside the house. Lots zoned R-1, R-2, R-3, MXD, O-1, O-2 or PD may be eligible, depending on lot size, and every ADU must be smaller than the main house. The same owner must own both the house and the ADU.
The City’s building standards are practical. An ADU must sit in a permanent structure on a permanent foundation and meet the residential building code. It needs a full kitchen with a stove and refrigerator, a bathroom with a mechanical fan or an operable window, heating, and a connection to the electric utility. Solar power can only be a secondary supply. Those rules shape the drawings: the foundation and framing, the floor over a garage, and the kitchen, bath, heating and electrical service design.
HVAC for Central Florida Heat and Humidity
Long, humid summers make dehumidification as important as cooling. We size equipment for the latent load, plan outside air for restaurants and gyms with high occupancy, and lay out condensate drains and duct insulation to prevent moisture problems. In homes, additions and garage conversions often need a new mini-split or an extension of the existing system, which we size to the Florida Building Code energy requirements.
Typical Orlando Project Types
- Restaurant and retail tenant improvements in shopping centers across Orange, Seminole and Osceola counties.
- Pool screen enclosures and lanai roofs designed for the site’s wind speed, a common addition in Central Florida homes.
- Room additions and garage conversions in growing suburbs such as Winter Garden, Clermont, Lake Nona and St. Cloud.
- Interior renovations that remove load-bearing walls in block and wood-frame homes.
- Lakefront lots with retaining walls, decks and foundations near the water on the area’s many lakes.
To the west, our page on Tampa Bay structural and MEP services covers soils, sinkholes and local permits.
Areas We Serve in Central Florida
We take projects across the Orlando metro area, including Downtown Orlando, Winter Park, Maitland, College Park, Dr. Phillips, Windermere, Winter Garden, Ocoee, Apopka, Altamonte Springs, Longwood, Sanford, Oviedo, Lake Mary, Kissimmee, St. Cloud, Celebration and Clermont, and elsewhere in Florida.
Florida Project Example
Our Florida project example is in Gibsonton, in Hillsborough County on the Gulf side of the state: the MEP design for a 796 sq ft retail space turned into an ice cream shop. Its HVAC design accounted for the heat given off by the refrigerated display counters. Read the project article.
Gibsonton, FL · MEPPortales Ice Cream Tenant ImprovementMEP design (HVAC, plumbing, electrical) for a 796 sq ft tenant improvement.
Johns Creek, GA · StructuralAmorino Gelato Steel CanopyStructural design for a six-bay steel (HSS) storefront canopy.
Fresno, CA · MEPCommunity Activity HallMEP design for a community activity hall of about 2,450 sq ft.
What You Receive
- Calculations and drawings for the structural or MEP scope of the project.
- Permit documentation from an engineer.
- Plan review responses to the City of Orlando, Orange County or another Central Florida department.
- Construction-stage support for contractor questions and field changes.
How It Works
- Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
- We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
- Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
- Plan check and construction supportWe answer plan-check comments and support your contractor during construction.
Nearby areas: we also prepare structural and MEP drawings for projects in Jacksonville.
Frequently Asked Questions
Do you work in Orange, Seminole and Osceola counties?
Yes. We work on projects across Central Florida and throughout the state.
Can you design structural and MEP for the same tenant improvement?
Yes. One team designs the structure and the building systems, which helps coordinate rooftop equipment, hood supports and roof openings.
Do inland Orlando projects really need hurricane design?
Yes. The Florida Building Code sets design wind speeds for every site in the state, and inland Central Florida still has wind loads high enough to control roof connections, uplift straps and the anchorage of rooftop equipment.
Is my site at risk for sinkholes?
Parts of Central Florida are prone to sinkholes because of the limestone below. A geotechnical engineer can study the soils at the site, and we design the foundation to their recommendations.
Can you design a pool screen enclosure or lanai roof?
Yes. We prepare the structural calculations and drawings for the frame, connections and footings, designed for the wind speed at the property.
What do you need from me to prepare a quote?
The project address city, the drawings or floor plan, photos of the existing conditions, any soils report, and a short description of the work.
Which Florida Building Code edition applies to my Orlando permit?
The 8th Edition (2023) Florida Building Code applies today. Under Florida law, the edition in effect on the date of the permit application governs the permitted work for the life of the permit, so we confirm the edition when you apply. Our 9th Edition article explains what changes.
Who reviews my permit in Kissimmee, Winter Park or Sanford?
Not the City of Orlando. Winter Park, Maitland, Winter Garden, Ocoee and Apopka have their own building departments, as do Kissimmee and Osceola County to the south and Sanford and Seminole County to the north. Unincorporated Orange County goes to the Orange County Division of Building Safety. We confirm the department from the address first.
Can I remove a wall in my concrete block home?
Often, yes, with engineering. Many Central Florida homes have block exterior walls and roof trusses, and some interior walls carry girder trusses or ceiling loads. A new opening in a block wall needs a lintel or beam and reinforced cells that keep the uplift path to the foundation continuous. Our article covers removing a load-bearing wall in Florida.
Sources
- City of Orlando, Permits and Inspections
- Orange County, Division of Building Safety: Storm Repair and Permit Information
- Florida Statutes, Section 553.73 (Florida Building Code)
- Florida Department of Environmental Protection, Florida Geological Survey: Sinkholes
- Florida Building Commission, Florida Building Code Information
- U.S. Geological Survey, Winter Park Florida Sinkhole of 1981
- National Hurricane Center, Hurricane Ian Intermediate Advisory 26A, September 29, 2022
- National Hurricane Center, Hurricane Milton Intermediate Advisory 20A, October 10, 2024
- Orange County, Mitigation Requirements for Re-Roofing (Site-Built Single Family Residential Structures)
- City of Orlando, Submit your Private Provider Application
- Florida Senate, Florida Statutes 553.791 (2025)
- City of Orlando, Residential Swimming Pool and Spa Checklist
- City of Orlando, Accessory Dwelling Units: Step by Step