Chrome Stone Structural is a structural engineer in Los Angeles providing structural engineering, MEP engineering and Title 24 energy compliance for projects across Southern California. We prepare the calculations and drawings for the permit. The Los Angeles Department of Building and Safety (LADBS) or another building department in the region reviews them. Our team also stays available while the project is built.
We work on projects across California. We work with homeowners, contractors, architects, designers and business owners on residential and commercial projects, from a single beam replacement to a full tenant build-out.
Engineering Services in Los Angeles
- Residential structural engineering: second stories and additions, ADUs and garage conversions, removed load-bearing walls, retaining walls and patio covers.
- Commercial structural engineering: tenant improvements, roof reinforcement, steel canopies and supports for rooftop equipment and kitchen hoods.
- MEP engineering: HVAC, electrical and plumbing design for restaurants, retail, offices and community buildings.
- Title 24 energy compliance for new buildings, additions, alterations and tenant improvements.
Designing for Los Angeles Projects
Los Angeles is in a high seismic region. As a result, lateral design is a large part of almost every structural set. It covers shear walls, hold-downs and steel moment frames for open floor plans, plus the connections that tie them to the foundation. Hillside lots add retaining walls and foundation design on sloping sites. Additions to older buildings often start with a review of the existing structure, because many houses in the city were framed long before today’s seismic provisions.
Working with LADBS and Other LA County Departments
LADBS reviews projects inside the City of Los Angeles. The city includes the San Fernando Valley, Hollywood, Silver Lake, Venice, Westchester and San Pedro. LADBS reviews projects under the Los Angeles Building Code. Smaller residential jobs may qualify for expedited or counter review, while larger additions, hillside work and commercial projects go through full plan check.
Many addresses that look like “Los Angeles” are not in the city. Los Angeles County Building and Safety reviews unincorporated communities such as Altadena, East Los Angeles and Marina del Rey. Meanwhile, Santa Monica, Pasadena, Glendale, Burbank, Culver City, Beverly Hills and Long Beach each run their own building department. We check the jurisdiction first, because it decides which code amendments and checklists apply.
Seismic Retrofit and Rebuild Work
In 2015, the City of Los Angeles adopted mandatory retrofit ordinances for two older building types. The first is wood-frame soft-story buildings, often apartments with parking or open space under the upper floors. The second is non-ductile concrete buildings. Owners of buildings on the city’s retrofit list need engineered retrofit plans, and the program sets deadlines for each step. We design soft-story retrofits with steel moment frames, cantilever columns or new shear walls, sized so the parking or open ground floor can stay in use.
After the January 2025 wildfires, many owners in Pacific Palisades, Altadena and nearby areas are rebuilding. Rebuilds go to LADBS or Los Angeles County, depending on the address. Sites in very high fire hazard severity zones must also meet the wildland-urban interface construction rules. These rules are in Chapter 7A of the building code.
Hillside Lots
Much of the city’s housing sits in the Santa Monica Mountains, the Hollywood Hills, Mount Washington and the hills around the Valley. Hillside projects usually need a geotechnical report, and retaining walls, caissons or grade beams are designed from its recommendations. Access, drainage and how a new wall works with existing walls on neighboring lots all affect the design. For that reason, we review the soils report and the site photos before quoting.
MEP and Title 24 Across the LA Basin
Los Angeles County spans several Title 24 climate zones. They range from the mild coast to the much hotter San Fernando and San Gabriel valleys. As a result, the same ADU can need different insulation, windows and cooling in Venice than in Van Nuys. For commercial spaces, a change of use usually means new exhaust, make-up air, grease waste plumbing and a larger electrical service. An office becoming a restaurant is a common example. We design those MEP systems together with the roof framing that has to carry the new equipment.
Typical Los Angeles Project Types
- ADUs and garage conversions across the city’s single-family neighborhoods, including detached backyard units and conversions of existing garages.
- Open floor plans in older homes, with steel or engineered wood beams replacing removed bearing walls.
- Soft-story retrofits for apartment buildings on the city’s retrofit list.
- Restaurant and retail tenant improvements with new hoods, rooftop units and the roof framing that supports them.
- Retaining walls and pools on sloping lots in the hills and canyons.
Areas We Serve in Southern California
We take projects throughout Los Angeles County, including Downtown LA, Hollywood, Silver Lake, Echo Park, Highland Park, Eagle Rock, the Westside, Mid-City, South LA, the San Fernando Valley, Pasadena, Glendale, Burbank, Santa Monica and Long Beach. We also work in Orange County, the Inland Empire, Riverside County and the Coachella Valley.
Southern California Projects
A recent Southern California project is in Redlands, in the Inland Empire: a 40-foot container pool and spa on a terraced hillside lot. Filled with water, the pool puts a large concentrated load close to the slopes, so we set it on a reinforced concrete support pad and held the terraces around it with reinforced masonry retaining walls on continuous footings. Read the Redlands pool case study.
Ontario, CA · StructuralAble Industrial Property-Line FenceStructural design for a 161 ft steel fence on an existing retaining wall.
Redlands, CA · StructuralContainer Pool and Retaining WallsStructural design for a container pool and masonry retaining walls on a terraced lot.
Cathedral City, CA · StructuralNew Two-Story ResidenceStructural design for a new 2,023 sq ft two-story wood-frame home.
What You Receive
- Calculations and drawings for the structural, MEP or energy scope of the project.
- Permit documentation ready to submit to the building department.
- Plan check responses to LADBS correction sheets or another department’s comments.
- Construction-stage support for contractor questions and field changes.
How It Works
- Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
- We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
- Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
- Plan check and construction supportWe answer plan-check comments and support your contractor during construction.
Nearby areas: we also prepare structural and MEP drawings for projects in Orange County, San Diego and Long Beach.
Recent projects: New two-story residence in Cathedral City, Container pool and retaining walls in Redlands and Able Industrial property-line fence in Ontario.
Frequently Asked Questions
Do you work in the City of Los Angeles and in Los Angeles County?
Yes. We work on projects in the City of Los Angeles, the other cities of Los Angeles County, the unincorporated county areas and across Southern California.
Is my property reviewed by LADBS or by another department?
LADBS reviews projects inside the City of Los Angeles. Unincorporated areas go to Los Angeles County Building and Safety, and cities such as Pasadena, Glendale and Santa Monica have their own building departments.
Can you design a soft-story retrofit for my building?
Yes. We prepare the retrofit calculations and drawings for wood-frame soft-story buildings, usually with steel frames or new shear walls at the open ground floor, and answer the plan check comments.
Can you design a hillside retaining wall or foundation?
Yes. We design reinforced concrete and masonry retaining walls and foundations for sloping sites based on the soils information available for the project.
Do you work on fire rebuilds?
Yes. We can prepare the structural, MEP and Title 24 documents for a home being rebuilt after the 2025 fires, designed to the code and fire-zone rules that apply at the address.
What do you need from me to prepare a quote?
The project address city, the drawings or a sketch with dimensions, photos of the existing structure for remodels, any soils report, and a short description of the work.