Home / Services / San Francisco
San Francisco, CA

Structural Engineer in San Francisco, CA: Structural, MEP and Title 24

Chrome Stone Structural provides structural engineering, MEP engineering and Title 24 compliance for projects in San Francisco and the Bay Area. Our engineering team prepares permit drawings for DBI review, including additions, garage ADUs, soft-story retrofits and tenant improvements.

Two-story rear addition to a home in San Jose, California
Chrome Stone project · San Jose, CA

Working on a soft-story building or a remodel in San Francisco? Send the address and drawings for structural and MEP design.

Founded 2025 · 14 years of team engineering experience · Structural, MEP and Title 24 in one team · California and Florida

  • Structural, MEP and Title 24One team for the whole permit set
  • Engineers serving California and FloridaCalculations and drawings prepared for permit review
  • Local permit drawingsPrepared for San Francisco DBI
  • Projects across CA, FL and beyondView our projects →

Chrome Stone Structural is a structural engineer for homes, flats and commercial spaces in San Francisco and across the Bay Area, with MEP engineering and Title 24 energy compliance in the same team. We prepare the calculations and drawings that the Department of Building Inspection (DBI) and the other Bay Area building departments review for permit.

Most San Francisco projects start with an existing building, so we begin with the existing framing and foundation. Nearby, we prepared the structural plans for a two-story rear addition in San Jose.

Engineering Services in San Francisco

  • Residential structural engineering: rear additions and vertical additions, ADUs, removed load-bearing walls, new openings and foundation work.
  • Commercial structural engineering: tenant improvements, roof reinforcement and supports for rooftop equipment and kitchen hoods.
  • MEP engineering: HVAC, electrical and plumbing design for restaurants, retail, offices and community spaces.
  • Title 24 energy compliance for additions, alterations and tenant improvements.

Designing for San Francisco Projects

San Francisco’s building stock includes many older wood-frame buildings on narrow lots, often with garages or open storefronts at the ground floor. That makes seismic design and the review of existing conditions central to most projects: additions and remodels have to work with the existing framing and foundation, and open ground floors may need steel moment frames or other lateral systems.

Row houses built side by side also bring shared property-line walls, limited access for equipment and foundations that sit close to the neighbors’ footings. Underpinning, new grade beams and shoring for excavation next to an existing building are common parts of a San Francisco structural set, and they have to be shown clearly enough for the contractor to sequence the work safely.

The city’s hills add another layer. On steep streets around Twin Peaks, Diamond Heights, Potrero Hill and Glen Park, homes often step down the slope with tall foundation walls at the back, and an addition can mean new retaining walls or drilled piers designed from the geotechnical recommendations.

DBI, Planning and the San Francisco Building Code

DBI enforces the San Francisco Building Code, which is the California Building Code with local amendments, and it publishes its own information sheets and administrative bulletins on structural topics. Many projects also need San Francisco Planning Department review before DBI issues a permit. Additions and some exterior changes in residential districts can trigger neighborhood notification, so the structural design is often finalized once the planning scheme is settled.

Smaller scopes can sometimes be approved over the counter, while additions, foundation work and commercial projects usually go through full plan review with written comments. We prepare the calculations and drawings for the review path your project is on and answer the structural comments in writing.

Soft-Story Buildings and Seismic Hazard Zones

San Francisco’s Mandatory Soft Story Retrofit Program covers certain older wood-frame, multi-family buildings where a garage or open space weakens the ground floor. Many of those retrofits are complete, but owners still add units, convert garages or open up ground floors in buildings that need the same kind of lateral strengthening. We design steel moment frames, cantilever columns and new shear walls that keep parking or retail space usable.

Parts of the city built on former bay fill are in mapped liquefaction zones. In those areas a geotechnical report usually shapes the foundation design, and it may call for mat foundations, deep foundations or ground improvement.

Energy and MEP in a Mild Climate

San Francisco is in Title 24 climate zone 3, with cool summers and mild winters, so heating, ventilation and envelope details matter more than cooling. The city also requires new construction to be all-electric, which affects heat pumps, water heating and the size of the electrical service. For alterations and tenant improvements we size the HVAC, electrical and plumbing for the new use and prepare the Title 24 forms that match.

Typical San Francisco Project Types

  • Vertical and rear additions on Victorian, Edwardian and mid-century homes in neighborhoods such as Noe Valley, Bernal Heights, the Sunset and the Richmond.
  • Garage and ground-floor ADUs that convert storage or parking space under an existing building into a new unit.
  • Opening interior walls in flats and single-family homes with new beams, posts and footings.
  • Restaurant and retail tenant improvements in ground-floor storefronts along the city’s commercial corridors.
  • Foundation replacement for older buildings on brick or unreinforced footings.

Areas We Serve in the Bay Area

We take projects in every San Francisco neighborhood, from the Mission, Castro and Haight to the Excelsior, Bayview and Pacific Heights. Around the bay we work in Daly City, South San Francisco, San Mateo, Redwood City, Palo Alto, Oakland, Berkeley, Alameda, Walnut Creek, Fremont and San Jose.

Bay Area Projects

In San Jose, Chrome Stone prepared the structural remodeling plans for a home with a two-story rear addition, including the roof and ceiling framing, wood beams and posts, and the key structural connections in the permit set. Elsewhere in California, our work includes a garage-to-ADU conversion in Madera and a new two-story home in Cathedral City.

What You Receive

  • Calculations and drawings for the structural, MEP or energy scope of the project.
  • Permit documentation ready to submit to the building department.
  • Plan review responses to DBI or another Bay Area department.
  • Construction-stage support for contractor questions and conditions found when walls are opened.

How It Works

  1. Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
  2. We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
  3. Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
  4. Plan check and construction supportWe answer plan-check comments and support your contractor during construction.

Nearby areas: we also prepare structural and MEP drawings for projects in Oakland and San Jose.

Frequently Asked Questions

Do you work outside San Francisco?

Yes. We work on projects across the Bay Area, including Oakland, the Peninsula and San Jose, and throughout California.

Can you design an addition on an older San Francisco building?

Yes. We start with the existing framing and foundation, then design the new structure and the lateral system so the building can carry the added loads.

Does my building need a soft-story retrofit?

The city’s program covers certain older wood-frame, multi-family buildings with a weak ground floor. If your building received a notice, or you plan to add units or open the ground floor, we can design the retrofit.

Can you convert my garage into an ADU?

Yes. We design the structural changes, which often include new frames at the garage opening and foundation work, plus the MEP systems and Title 24 forms for the new unit. See how garage conversion permits work in California.

Will I need a geotechnical report?

Often, yes, for new foundations, excavation next to neighbors and sites in liquefaction zones. We tell you at the quote stage if we expect DBI to ask for one.

What do you need from me to prepare a quote?

The project address city, the existing and proposed drawings or sketches, photos of the existing structure, and a short description of the work.

Which building code applies to a San Francisco permit in 2026?

The 2025 California Building Standards Code took effect statewide on January 1, 2026, and DBI enforces it through the San Francisco Building Code, which adds local amendments. Applications submitted on or after that date are reviewed under the 2025 codes. Earlier applications generally stay under the 2022 codes.

Does my project need Planning review before DBI?

Many do. Additions and some exterior changes in residential districts need San Francisco Planning Department review, and some trigger neighborhood notification, before DBI issues the building permit. We usually finalize the structural design once the planning scheme is settled.

Does an ADU in San Francisco need fire sprinklers?

Under California’s ADU law, an ADU does not need fire sprinklers if they are not required for the primary residence. In multi-unit buildings the existing building may already require them, so we confirm the requirement for each address.

Sources

Call Chrome Stone
Request a Quote

Request a Quote for San Francisco

Tell us the project address and city, the type of work and what the building department is asking for.

  • Project city and state
  • Building type and proposed work
  • Required engineering disciplines
  • Architectural or existing-condition drawings available

Prefer to call? +1-279-221-5279


    We will use this address to respond to your inquiry.


    Add it if you prefer a call back.


    City only. A full property address is not needed for this first inquiry.

    Engineering support needed

    California Title 24 applies to California projects only.


    Briefly describe the building, proposed work, and any questions. Do not include passwords, payment details, or confidential documents.

    Add project stage or other details (optional)


    Leave blank if unknown.


    Tell us what the date relates to. The team will confirm feasibility after reviewing the scope.

    We use these details to review and respond to your inquiry. Read our Privacy Policy.

    While we review your project, follow Chrome Stone Structural on LinkedIn for new projects and code updates. Follow us on LinkedIn