Home / Services / Sacramento
Sacramento, CA

Structural Engineer in Sacramento, CA: Structural, MEP and Title 24

Chrome Stone Structural is a structural and MEP engineering firm with its California office in Sacramento, on Cottage Way. Our engineering team prepares structural, MEP and Title 24 documents for permit for homes, ADUs, additions and commercial projects across the Sacramento region.

Attached garage converted into an ADU in Madera, California
Chrome Stone project · Madera, CA

Planning an addition, ADU or commercial build-out in the Sacramento area? Send us your plans or a sketch for structural, MEP and Title 24 design.

Founded 2025 · 14 years of team engineering experience · Structural, MEP and Title 24 in one team · California and Florida

  • Structural, MEP and Title 24One team for the whole permit set
  • Engineers serving California and FloridaCalculations and drawings prepared for permit review
  • Local permit drawingsPrepared for the City and County of Sacramento
  • Projects across CA, FL and beyondView our projects →

Chrome Stone Structural is a structural engineer based in Sacramento, with MEP engineering and Title 24 energy compliance in the same team. Our California office is at 3400 Cottage Way, and we prepare the calculations and drawings that the City of Sacramento, Sacramento County and the surrounding building departments review for permit.

We work with homeowners, contractors, architects and business owners across Sacramento, Placer, Yolo and El Dorado counties, from ADUs and second stories to restaurant tenant improvements, and we stay available while the project is built.

Engineering Services in Sacramento

  • Structural engineering: new homes, second stories and rear additions, ADUs and garage conversions, removed load-bearing walls, patio covers, retaining walls and foundations.
  • Commercial structural work: tenant improvements, roof reinforcement, supports for rooftop mechanical equipment and kitchen hoods.
  • MEP engineering: HVAC, electrical and plumbing design for tenant improvements, restaurants, offices and community buildings.
  • Title 24 energy compliance: residential and nonresidential documentation for new buildings, additions, alterations and tenant improvements.

Designing for Sacramento Projects

Sacramento-area projects are designed to the current California Building Code, with seismic and wind forces calculated for the site using ASCE 7. Many homes in the region are older wood-frame houses, so additions and remodels often start with a review of the existing framing and foundation before new loads are added. The region’s hot summers also make HVAC sizing and Title 24 compliance an important part of additions, ADUs and commercial tenant improvements.

Ground conditions vary a lot across the valley. Some neighborhoods sit on expansive clay that swells and shrinks with the seasons, which affects slab and footing design, and areas near the American and Sacramento rivers, such as Natomas and parts of the Pocket, are in mapped flood zones where the floor elevation and foundation type matter. When a soils report is available we design to its recommendations; when it is not, we tell you early whether the building department is likely to ask for one.

City of Sacramento Design Criteria

The City of Sacramento Building Division publishes the local design values that plans must use on its Design Criteria page (all values below are from that page, checked 2026-11-10). For homes under the California Residential Code (Table R301.2):

  • Wind: 110 mph, with topographic effects considered; not a special wind region or windborne debris zone.
  • Seismic Design Category: D0 for one- and two-family dwellings.
  • Termite damage: rated “very heavy”, so wood near the ground needs protection or treated lumber.
  • Ground snow load and frost depth: not applicable; weathering is negligible.
  • Flood hazards: per the city’s floodplain development information.

For commercial buildings, the same page lists Seismic Design Category D and wind speeds of 90, 95 and 105 mph for Risk Categories I, II and III, with Exposure C unless the site meets Exposure B. Sacramento is in Climate Zone 12 for Title 24.

On soils, the page says a soils report is required for new buildings. Small additions, renovations and minor structures can use an allowable bearing pressure of 1,500 psf without one. The city also notes that many areas of Sacramento have expansive soil, that the designer must identify it, and that a soils report is required where it is present. A report that is more than three years old, or that refers to the previous code cycle, needs an addendum. See our article on foundation problems in California homes.

Building in a Sacramento Flood Zone

Sacramento’s flood rules are built around the 100-year flood, and the City’s 200-year floodplain requirements took effect in July 2016. Since July 1, 2024, the Natomas Basin has been mapped by FEMA as an A99 flood zone. There, new construction and substantial improvements, meaning work valued at half or more of the building’s market value, must raise the lowest floor, including any basement, at least one foot above the highest adjacent 100-year level of the City’s drainage system and at least 18 inches above the controlling overland release point in the street. Commercial buildings may be elevated or floodproofed to the same levels. The City also asks for elevation documentation and a hold harmless agreement, and recommends raising outdoor HVAC units. We set the slab and foundation design to the required floor level and place the mechanical equipment to match.

Sacramento Permits and Plan Check

Inside city limits, plans go to the City of Sacramento’s Community Development Department, Building Division. Unincorporated areas such as Arden-Arcade, Carmichael, Fair Oaks and Orangevale are reviewed by Sacramento County’s building permits office. Elk Grove, Folsom, Rancho Cordova, Citrus Heights and Roseville each have their own building department, and so do West Sacramento and Davis across the county line in Yolo County. Each one has its own submittal checklist, so we set up the drawings and calculations to match the department that will review them.

When a plan checker returns comments, we answer them in writing and revise the sheets, so the contractor or homeowner does not have to interpret engineering questions on their own.

Small Projects and Faster Review

The City of Sacramento offers Small Project Rapid Review (SPRR), an expedited plan review for limited scopes. For single-family homes it can include remodels with minor structural changes, attached patio covers and trellises, attached pre-manufactured sunrooms under 500 square feet, outdoor pools and spas, and tile roof conversions with supporting calculations. New detached structures, additions and revisions to approved permits are not eligible. A complete, clear set is what makes a small project a good fit for this path.

For ADUs, the city has developed free, permit-ready ADU plans for City of Sacramento residents, available through its ADU Resource Center. A site-specific foundation, utility connections and Title 24 work are still part of each project, and custom or attached ADUs need their own design. See our article on ADU structural requirements.

Work in the Street or Sidewalk: Sacramento Encroachment Permits

Work in the public right-of-way, usually a sidewalk, street, alley or easement, needs a separate permit from City of Sacramento Public Works, apart from the building permit. Public Works sorts the work into minor or major encroachment permits under its own criteria. The two permits are linked: if your building project needs offsite improvements, the encroachment permit must reach Development Engineering no later than the second building plan check submittal, or the building review cannot continue. Check early whether your project touches the right-of-way. We prepare the building’s structural and MEP drawings and show where the work meets the property line, so the two reviews line up.

Title 24 in the Sacramento Valley

Sacramento is in California Energy Commission climate zone 12, with long, hot and dry summers. That climate drives the energy model for every new home, ADU and addition: insulation levels, window performance, duct location and the size of the cooling system all affect whether the project complies. Because our team designs the structure, the MEP systems and the Title 24 documentation together, the energy forms match what is actually shown on the plans. Learn more about our Title 24 energy compliance service.

All-Electric New Buildings in Sacramento

The City of Sacramento’s New Building Electrification Ordinance took effect on January 1, 2023 and required new buildings of three stories or fewer to be all-electric, with a few exceptions. After an April 2023 court ruling on a similar Berkeley ordinance, the City suspended enforcement. Its Climate Action and Adaptation Plan, adopted in February 2024, calls instead for a flexible-path reach code that asks new buildings to exceed the state energy standards, so check the City’s current page before you choose gas or electric equipment. Either way, we design the heat pump HVAC, water heating and electrical service for new Sacramento homes and commercial spaces and prepare the Title 24 documentation to match.

Rooftop Solar Permits in Sacramento

The City of Sacramento offers two paths for a residential solar permit. SolarAPP+ is an automated plan review for one- and two-unit homes and ADUs, open to contractors only and not to ballasted systems. The contractor submits the design to SolarAPP+, then applies for the City permit with the approval documents, the City’s building application for solar energy systems, the SMUD interconnection letter and the construction plans. Without SolarAPP+, the same application goes to the City for standard plan review, with the equipment specifications added. Commercial solar has its own review. Panels and racking add load to the roof, so an older roof, a long rafter span or a heavy system may need a structural check of the framing. We prepare the roof framing calculations and details when they are needed, and the electrical and Title 24 energy compliance documents for the project.

Commercial MEP for Sacramento Summers

Summers in the valley are long and hot, so cooling loads control most commercial MEP designs here. When an older retail space becomes a restaurant, gym or clinic, the existing rooftop units are often too small for the new use, the electrical service may need an upgrade, and new plumbing has to reach fixtures that did not exist before. We size the new HVAC equipment, lay out the power and lighting, design the plumbing and grease waste, and check that the roof framing can carry the new units. One team handles all of it, so the mechanical, electrical, structural and energy sheets agree with each other when they reach the plan checker.

Typical Sacramento Project Types

  • ADUs and garage conversions in established neighborhoods such as Land Park, Curtis Park, East Sacramento and Oak Park, where California’s ADU laws have made backyard units common.
  • Second stories and rear additions on mid-century homes, which need a check of the existing foundation and new shear walls for the added story.
  • Opening up floor plans by removing load-bearing walls and adding beams and posts in older houses in Midtown and the inner suburbs.
  • Commercial tenant improvements for restaurants, retail and offices along the region’s commercial corridors, often combining structural, MEP and Title 24 work.
  • Patio covers, decks and retaining walls for homes in the foothill communities toward Folsom, Granite Bay and El Dorado Hills.

Pools, Spas and Retaining Walls in Sacramento

Swimming pools and spas are on the City of Sacramento’s list of work that needs a building permit; only prefabricated pools less than 18 inches deep are exempt. A retaining wall up to 4 feet high, measured from the bottom of the footing to the top of the wall, is exempt unless it supports a surcharge such as a driveway, a slope or a building above it. On a sloping lot, a pool often needs both: an engineered support for the pool and retaining walls for the grade around it. In Redlands, we engineered the reinforced concrete support pad and the reinforced masonry retaining walls on continuous footings for a 40-foot container pool and spa on a terraced hillside lot. Read the Redlands container pool case study and our article on retaining wall permits in California.

Trees and Tree Permits on Sacramento Projects

The City of Sacramento requires a permit before regulated work on City trees or private protected trees. City trees stand in a City park, on City property or in the public right-of-way, including the sidewalk and park strip. Private protected trees include native oaks, California sycamores and buckeyes at 12 inches in diameter, any tree at 32 inches on a lot with an existing house or duplex, and any tree at 24 inches on undeveloped, commercial, industrial or apartment land. The rules are in City Code Chapter 12.56. A new addition, garage or retaining wall near one of these trees can change the plan, so check the tree first. Where roots limit a standard footing, we can design foundations around them, such as grade beams or piers, based on the tree locations on your site plan and the project’s soils report.

Existing Buildings and Repair Design in Sacramento

Not every call starts with a new design. Sacramento homeowners, buyers and property managers also come to us for repair designs on existing buildings:

  • Foundation and crack repairs: slab and wall cracks, sloping floors and sticking doors, often linked to expansive clay or drainage around the house.
  • Wall checks: whether a wall is load-bearing before it is opened or removed.
  • Unpermitted work: removed walls, enclosed patios or converted garages that need drawings to be legalized.

We work from photos, measurements and any openings your contractor makes, and the result is drawings and calculations the contractor and the building department can use. See our article on foundation problems in California homes.

Demolition Permits and Debris Recycling in Sacramento

In the City of Sacramento, demolition projects, projects covered by CALGreen and building permits must recycle at least 65% of the debris the work generates. Since January 15, 2026, the City reviews Waste Management Plans and Waste Logs in the Green Halo online system. For a building permit, Green Halo emails the applicant a plan that the City has already started; for a wrecking (demolition) permit, the applicant starts the plan on the Green Halo site, and the Planning Division signs the application before the recycling team does. Debris may only be hauled by a franchised hauler or by the project itself, and the recycling tickets are uploaded to the Waste Log after the work is done. When a project removes part of a building rather than all of it, the structural drawings show what stays, what comes out and how the remaining structure is supported. We prepare those drawings as part of our structural engineering services in California.

Historic Districts and Landmarks in Sacramento

The Sacramento Register lists nearly 900 landmarks and more than 30 historic districts. If your property is a landmark or sits in a historic district, the project goes through Preservation review before the building permit. Start by checking the address in the City’s Planning Land Use Information portal. On most buildings, Preservation staff review exterior changes against the City Code, the Secretary of the Interior’s Standards and any district plan. After the Record of Decision, the project goes to the Building Division for plan check, and any later change to the design goes back to Preservation staff first. The City’s permit exemptions for small structures do not apply on a landmark or in a preservation district. Structural upgrades such as new beams, shear walls and footings can often sit inside the building, and we prepare the structural drawings to match the architect’s Preservation submittal.

Areas We Serve Around Sacramento

We work across the Sacramento metro area, including Downtown and Midtown Sacramento, Natomas, Arden-Arcade, Carmichael, Elk Grove, Folsom, Rancho Cordova, Citrus Heights, Roseville, Rocklin, Lincoln, West Sacramento, Davis and Woodland. We also take projects in the wider Central Valley, from Stockton and Modesto down to Fresno and Madera.

Central California Projects

Our nearest structural project to Sacramento is in Madera, in the Central Valley: an attached garage converted into a 1,078 sq ft, three-bedroom ADU. The existing ceiling joists were not designed for finished ceilings and new loads, so we reinforced them and added localized concrete footings only under the new posts, instead of rebuilding the structure. Read the Madera ADU case study.

What You Receive

  • Calculations and drawings for the structural, MEP or energy scope of the project.
  • Permit documentation ready to submit to the building department.
  • Plan check responses when the city or county building department returns comments.
  • Construction-stage support for contractor questions and field changes.

How It Works

  1. Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
  2. We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
  3. Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
  4. Plan check and construction supportWe answer plan-check comments and support your contractor during construction.

Nearby areas: we also prepare structural and MEP drawings for projects in Fresno.

Our Sacramento Office

Chrome Stone Structural
3400 Cottage Way, Ste G2, Sacramento, CA 95825
Phone: +1-279-221-5279
Monday to Friday, 9am to 5pm

Frequently Asked Questions

Where is your Sacramento office?

Our California office is at 3400 Cottage Way, Ste G2, Sacramento, CA 95825.

Do you work outside the city of Sacramento?

Yes. We work on projects across the Sacramento region, including Elk Grove, Folsom, Roseville and West Sacramento, and throughout California.

Do I need a structural engineer for an ADU in Sacramento?

Most ADUs and garage conversions need structural calculations and drawings for the foundation, framing and lateral system, and a conditioned ADU also needs Title 24 energy documentation. We can prepare both as one package. Our article explains what a garage conversion permit requires. See also our ADU structural requirements article.

Which Title 24 climate zone is Sacramento in?

Sacramento is in climate zone 12. The climate zone sets the energy requirements for insulation, windows and HVAC, so it is the starting point of every Title 24 report we prepare for the area.

Will the building department ask for a soils report?

It depends on the project and the site. New homes, larger additions and sites with expansive soil or slopes often need one. We tell you early if we expect it.

What do you need from me to prepare a quote?

The project address city, the drawings or a sketch with dimensions, photos of the existing structure for remodels, and a short description of the work.

Which building code applies to a Sacramento permit in 2026?

The 2025 California Building Standards Code took effect statewide on January 1, 2026. Permit applications submitted on or after that date are reviewed under the 2025 codes, including the California Building Code, Residential Code and Title 24 energy standards. Earlier applications generally stay under the 2022 codes. The City of Sacramento and the surrounding cities can add local amendments, which we check for each address.

Does an ADU in Sacramento need fire sprinklers?

Under California’s ADU law, an accessory dwelling unit does not need fire sprinklers if they are not required for the primary residence. If sprinklers are required for the main house, the city can require them in the ADU as well. We note the requirement on the drawings and coordinate it with the plumbing design.

Does a patio cover in Sacramento need a permit and an engineer?

An attached patio cover usually needs a building permit. A simple cover that fits the department’s standard plan may not need an engineer, while long spans, heavy roofing or a connection to a second floor usually do. Our article explains when a patio cover needs a structural engineer.

What wind speed and seismic category does Sacramento use for homes?

The City of Sacramento lists 110 mph wind and Seismic Design Category D0 for one- and two-family dwellings.

Can a small addition in Sacramento skip the soils report?

Often. The city allows 1,500 psf bearing pressure without a soils report for small additions and minor structures, but a report is required for new buildings and wherever expansive soil is present.

Does Sacramento have a faster review for small projects?

Yes. Small Project Rapid Review covers limited scopes such as minor structural remodels and attached patio covers. Additions and new detached structures are not eligible.

Does the City of Sacramento have free ADU plans?

Yes. The city has developed free, permit-ready ADU plans for City of Sacramento residents, available through its ADU Resource Center.

Can you design repairs for cracks or a sagging floor in my Sacramento home?

Yes. We prepare repair drawings for foundations, cracks and framing, working from photos, measurements and any inspection or soils report the owner has.

Can I apply for a City of Sacramento building permit online?

Yes. The City of Sacramento takes almost all building permit applications online through its Public Permit Portal. Projects that need plan review, residential or commercial, go through the Electronic Plan Check (EPC) program, where the applicant uploads the application, the construction drawings and supporting documents such as structural calculations and soil reports. The same portal shows the status of the application.

How do I apply for a Sacramento County building permit?

For property in unincorporated Sacramento County, such as Carmichael, Fair Oaks or Arden-Arcade, the County’s building permits division accepts plans only by electronic submittal, for projects large and small. Applications, plans and status checks go through the County’s Accela Citizen Access portal. Elk Grove, Folsom, Rancho Cordova and the other incorporated cities run their own building departments, so apply there if your address is inside one of them.

What work needs a building permit in the City of Sacramento?

The city requires a permit for new construction, additions, remodeling, and repairs to electrical, mechanical and plumbing systems. Its examples include room additions, garage conversions, decks and patio covers, retaining walls, re-roofing, window replacements, water heaters and sheds. Some small work is exempt, such as a one-story detached accessory structure of up to 120 sq ft, but the exemptions do not apply in a design review or preservation district or to a historic landmark.

When does a Sacramento project need structural calculations?

The City of Sacramento asks for structural engineering calculations when a project does not meet the conventional requirements of the California Building Code. Work outside those rules, such as removing a load-bearing wall or adding a long beam, is a common reason. The plan set also includes structural plans for the foundation, floor and roof framing, with details such as footings. We prepare both from your photos, drawings and measurements.

Can I look up the permit history of a Sacramento property?

For an address in the City of Sacramento, yes. Log in to the Public Permit Portal, set the start date back as far as you need (the city’s instructions use 01/01/1950 to capture the full history), enter the street number and the street name without the suffix, and search. The public kiosk at the city’s permit counter offers the same search. Old permits and approved plans help us understand an existing building before we design changes to it.

What happens after a Sacramento permit is issued?

In the City of Sacramento, inspections are required before any work is covered or concealed, and a project is not approved until city inspection staff accept it. The city inspector phones you to set a time, and the permit and the city-approved plans must be at the site. Some residential web permits, such as minor HVAC, water heater, solar and EV charger permits, now use virtual inspections. In unincorporated Sacramento County, you schedule an inspection online through Accela Citizen Access, by phone or by text message.

Sources

Call Chrome Stone
Request a Quote

Request a Quote for Sacramento

Tell us the project address and city, the type of work and what the building department is asking for.

  • Project city and state
  • Building type and proposed work
  • Required engineering disciplines
  • Architectural or existing-condition drawings available

Prefer to call? +1-279-221-5279


    We will use this address to respond to your inquiry.


    Add it if you prefer a call back.


    City only. A full property address is not needed for this first inquiry.

    Engineering support needed

    California Title 24 applies to California projects only.


    Briefly describe the building, proposed work, and any questions. Do not include passwords, payment details, or confidential documents.

    Add project stage or other details (optional)


    Leave blank if unknown.


    Tell us what the date relates to. The team will confirm feasibility after reviewing the scope.

    We use these details to review and respond to your inquiry. Read our Privacy Policy.

    While we review your project, follow Chrome Stone Structural on LinkedIn for new projects and code updates. Follow us on LinkedIn