
The Ninth Edition (2026) of the Florida Building Code takes effect statewide on December 31, 2026. It replaces the Eighth Edition (2023), and it is based on the 2024 International Codes, where the Eighth Edition was based on the 2021 editions. Your permit is governed by the edition in effect on the date you apply, and that edition stays with the permit for its whole life.
This article explains which edition will govern your project and what has changed in the code’s structural reference standards. It also covers what to check on a permit set before and after the changeover. Everything here comes from the Florida Statutes, the published code text and Miami-Dade County’s product approval notices. Where official details are still being finalized, we say so.
Key Dates
| Item | What the official sources show |
|---|---|
| Ninth Edition (2026) effective date | December 31, 2026, per the code publisher’s listing for every volume and Miami-Dade County’s product approval notices |
| Eighth Edition (2023) | Took effect December 31, 2023, and governs applications submitted before the Ninth Edition takes effect |
| Glitch amendments | The Florida Building Commission’s second 45-day comment period on proposed glitch changes to the 2026 code ended October 8, 2026 |
| Next Commission meeting | December 8, 2026, per the Commission’s site (floridabuilding.org) |
Section 553.73 of the Florida Statutes requires the Commission to adopt an updated code every three years. It also says an update cannot take effect sooner than six months after the updated code is published.
Why Florida Updates Its Code
Florida has one statewide building code, adopted by the Florida Building Commission. State law requires the Commission to adopt an updated Florida Building Code every three years, after reviewing the latest editions of the international model codes for building, residential, existing buildings, mechanical, plumbing and fuel gas, and the National Electrical Code. Florida then adds its own requirements, including the High-Velocity Hurricane Zone chapters. That cycle is why designers, contractors and owners see a new edition, and a changeover period, at regular intervals.
Which Edition Governs Your Permit
Under Section 553.73, the edition in effect on the date of the permit application governs the permitted work for the life of the permit and any extension. It is the application date that counts, not the date the permit is issued.
- Applied on or before December 30, 2026: the project is reviewed and built under the Eighth Edition, even if review continues into 2027.
- Applied on or after December 31, 2026: the Ninth Edition applies.
- Revisions to an active permit generally stay under the original edition. A brand-new application for a separate scope does not. Ask the building department how it treats a revision that adds substantial new work.
Some departments publish their own cutoff times for online submittals around the changeover. Check your building department’s notices if you plan to apply in the last days of December.
What the Ninth Edition Includes
The Ninth Edition has the same family of volumes as the Eighth. Each volume is based on the 2024 model code it amends:
- Building: 2024 International Building Code.
- Residential: 2024 International Residential Code.
- Existing Building: 2024 International Existing Building Code. It governs repairs, alterations and additions to existing buildings.
- Energy Conservation: 2024 International Energy Conservation Code.
- Mechanical, Plumbing and Fuel Gas: the 2024 IMC, IPC and IFGC.
- Accessibility.
- Test Protocols for High-Velocity Hurricane Zones.
Every volume carries Florida-specific amendments. That means the Florida text, not the national model code, is the one to design to. Many Florida provisions are carried forward unchanged, including the High-Velocity Hurricane Zone sections.
Structural Reference Standards: What Changed
For structural engineers, the most visible change is in Chapter 35, the list of referenced standards. Comparing the published Eighth and Ninth Edition Building volumes:
| Standard | Eighth Edition (2023) | Ninth Edition (2026) |
|---|---|---|
| Structural steel (AISC 360) | AISC 360-16 | AISC 360-22 |
| Wood (NDS) | NDS 2018 | NDS 2024 |
| Concrete (ACI 318) | ACI 318-19 | ACI 318-19 (no change) |
| Loads (ASCE 7) | ASCE 7-22 | ASCE 7-22 (no change) |
Some articles say the Ninth Edition is what brings ASCE 7-22 to Florida. The published Eighth Edition already references ASCE 7-22, so wind and other load calculations keep the same base standard. In the HVHZ, Section 1620.2 keeps the same county design wind speeds in the Ninth Edition (for Risk Category II, 175 mph in Miami-Dade and 170 mph in Broward), and Section 1620.3 still requires at least Exposure C.
On a permit set, the steel and wood standard updates show up in three places:
- General notes and calculations: they should name AISC 360-22 and NDS 2024 for applications under the Ninth Edition.
- Connection and member checks: these should be run with design software and tables updated to the new editions.
- Manufacturer evaluation reports: for engineered wood products and connectors, these should be checked against the new edition.
Section 1603.1.4 still requires the wind design data on the drawings: wind speeds, risk category, exposure, internal pressure coefficients, and component and cladding pressures by zone.
Product Approvals and Roofing in the HVHZ
Miami-Dade County’s product approval notices say that changes in the HVHZ roofing chapter and HVHZ test protocols in the Ninth Edition affect some roofing underlayment and hip-and-ridge shingle Notices of Acceptance (NOAs). For roofing permits applied for on or after December 31, 2026 in Miami-Dade or Broward, check that each roofing product’s NOA or Florida Product Approval is valid under the Ninth Edition. Our HVHZ article on Miami-Dade and Broward covers the zone’s structural requirements.
Energy and MEP Drawings
The Energy Conservation, Mechanical, Plumbing and Fuel Gas volumes move to the 2024 model codes with Florida amendments. Energy compliance forms, equipment schedules and MEP general notes should cite the edition that governs the application. The Commission’s code development pages list the approved and proposed changes by discipline, including energy, mechanical, plumbing and electrical. Until the final text and any glitch amendments are confirmed, we check the specific provision that affects a design against the published Ninth Edition rather than relying on summaries.
Local Amendments
Under Section 553.73, a local government may adopt technical amendments only if they are more stringent than the state code, and no more than once every six months, after a public hearing showing local need. Those amendments last only until the next edition is adopted, unless they are carried forward, so local rules can change at the same time as the state code. Check your county or city’s building department for amendments that apply on or after December 31, 2026.
Where to Follow the Update
The Florida Building Commission’s website posts materials related to the 2026 update, including tracking charts of the changes, together with code resources for construction professionals. Local building departments announce how they will handle applications around the changeover date, so check the department that will review your project. For projects in design now, we confirm the governing edition at the start and prepare the drawings to it. See our Florida structural engineering services.
A Permit-Set Checklist for the Changeover
- Decide which edition your project will use, based on when you can realistically submit a complete application.
- Put the governing edition on the cover sheet and in the structural, energy and MEP general notes.
- Update the steel and wood design references (AISC 360-22, NDS 2024) for Ninth Edition applications.
- Recheck product approvals, especially HVHZ roofing products, against the edition that applies.
- Check for local technical amendments and submittal cutoffs in your jurisdiction.
- For permits already in review, ask before adding scope. A new application may fall under the new edition.
How Chrome Stone Helps
Chrome Stone Structural prepares structural and MEP permit drawings for projects across Florida. We can tell you which edition your application falls under and update calculations and notes to match. We also answer plan review comments in Miami, Fort Lauderdale, West Palm Beach, Tampa, Orlando, Jacksonville, St. Petersburg and Southwest Florida. See our Florida structural engineering overview.
Frequently Asked Questions
When does the 2026 Florida Building Code take effect?
The Ninth Edition (2026) takes effect on December 31, 2026. Permit applications submitted before that date stay under the Eighth Edition (2023).
Does the permit issue date or the application date decide the code edition?
The application date. Under Section 553.73 of the Florida Statutes, the edition in effect when you apply governs the work for the life of the permit and any extension.
What model codes is the Ninth Edition based on?
The 2024 International Codes (IBC, IRC, IEBC, IECC, IMC, IPC and IFGC), each with Florida amendments. The Eighth Edition was based on the 2021 editions.
Does the Ninth Edition change wind design to ASCE 7-22?
No. The Eighth Edition already references ASCE 7-22. The structural standards that change are steel (AISC 360-16 to 360-22) and wood (NDS 2018 to 2024).
Do HVHZ wind speeds change in 2026?
No. The published Ninth Edition keeps the Miami-Dade and Broward design wind speeds in Section 1620.2 and the Exposure C requirement.
Will my product approvals still be valid?
Check each product’s approval for the edition your permit falls under. Miami-Dade has warned that some roofing underlayment and hip-and-ridge shingle NOAs are affected by the Ninth Edition’s HVHZ roofing and test protocol changes.
Sources
- The Florida Senate, Florida Statutes Section 553.73 (2025), Florida Building Code
- Florida Building Commission, Florida Building Code Information
We post one project and one code or engineering note every week on LinkedIn. Follow Chrome Stone on LinkedIn