Home / Services / Fort Lauderdale
Fort Lauderdale, FL

Structural Engineer in Fort Lauderdale, FL: Structural and MEP Design

Chrome Stone Structural provides structural and MEP engineering for projects in Fort Lauderdale and Broward County from its nearby Miami office. Our engineering team prepares HVHZ permit drawings for renovations, condominium repairs and commercial tenant improvements.

Steel and glass storefront canopy at a gelato shop in Johns Creek, Georgia
Chrome Stone project · Johns Creek, GA

Need repair drawings after a 40-year or milestone report, or HVHZ wind design in Broward? Send the report or plans for a quote.

Founded 2025 · 14 years of team engineering experience · Structural, MEP and wind design in one team · California and Florida

  • Structural, MEP and wind designOne team for the whole permit set
  • Engineers serving California and FloridaCalculations and drawings prepared for permit review
  • Local permit drawingsPrepared for Fort Lauderdale and Broward cities
  • Projects across CA, FL and beyondView our projects →

Chrome Stone Structural provides structural and MEP engineering for projects in Fort Lauderdale, Broward County and the rest of South Florida. Our Florida office is on Biscayne Boulevard in Miami, close to Broward, and we prepare the calculations and drawings that the City of Fort Lauderdale and the other Broward building departments review for permit. We stay available while the project is built.

We work on projects across Florida, and our Florida structural engineering page covers the work statewide. We work with homeowners, condominium associations, contractors, architects and business owners on residential and commercial projects, from canal-front homes to restaurant build-outs on Las Olas.

Engineering Services in Fort Lauderdale

  • Structural engineering: additions and renovations, removed load-bearing walls, roof framing, balconies, canopies, screen enclosures, retaining walls and foundations.
  • Wind load design: HVHZ wind pressure calculations, uplift connections, rooftop equipment anchorage and design pressure schedules for windows and doors.
  • Commercial structural work: tenant improvements, roof reinforcement and supports for rooftop mechanical equipment and kitchen hoods.
  • MEP engineering: HVAC, electrical and plumbing design for restaurants, retail, offices and residential projects.

Designing in Broward’s High-Velocity Hurricane Zone

Broward County is one of the two counties in the High-Velocity Hurricane Zone (HVHZ) of the Florida Building Code, together with Miami-Dade. Every structural set in Fort Lauderdale is designed for HVHZ wind pressures, with a continuous load path from the roof covering through the trusses, walls and foundation. Exterior products such as windows, doors, shutters, garage doors and roofing need a Miami-Dade Notice of Acceptance (NOA) or another approval accepted for the HVHZ, and the engineer’s drawings set the design pressures those products must meet.

Our article on HVHZ design in Miami-Dade and Broward explains the rules in more detail, and our wind load design service covers the calculations we prepare.

Fort Lauderdale and Broward Building Departments

Inside city limits, permits and plan review go through the City of Fort Lauderdale’s Development Services Department. Most of Broward County is incorporated, so nearby addresses are usually reviewed by their own city: Hollywood, Pompano Beach, Wilton Manors, Oakland Park, Lauderdale-by-the-Sea, Plantation, Davie, Sunrise, Coral Springs and Pembroke Pines each have a building department. The Broward County Board of Rules and Appeals (BORA) oversees how the Florida Building Code is applied across the county and publishes policies that local departments follow.

Older Buildings: County Safety Rules and Milestone Reports

Broward County’s building safety inspection program, set by the Broward County Board of Rules and Appeals, applies to buildings 25 years of age or older, and since 2022 Florida law has also required milestone inspections for condominium and cooperative buildings three habitable stories or taller. The inspections themselves are performed by the engineer or architect the owner or association retains for them. Chrome Stone works from the finished report: we prepare the structural repair drawings, calculations and permit documents for the deterioration it identifies. That work includes concrete spalling and corroded reinforcing, balcony and walkway slabs, railings and roof framing. We then coordinate with the contractor who carries out the work. Florida’s milestone law requires repairs for substantial structural deterioration to begin within the period the law sets after the building department receives the phase two report, and our milestone repair article walks through the steps.

Broward Product Approvals and Window and Door Packages

Broward is in the High-Velocity Hurricane Zone, where the design wind speed for most buildings (Risk Category II) is 170 mph and every site is treated as at least Exposure C. Replacement windows, doors and storefronts must carry an approval for HVHZ use, such as a Miami-Dade Notice of Acceptance or a Florida Product Approval approved for the HVHZ. Confirm with your building department which approvals it accepts. For a replacement or renovation permit, we prepare the opening schedule with the positive and negative design pressure for each opening’s wind zone. We then check the chosen products against it: rated pressure, maximum tested size, large or small missile impact rating, and the anchorage into concrete, block or a wood buck. Our HVHZ article covers the code sections behind each check.

Canals, Flood Zones and the Coast

Fort Lauderdale is built around miles of canals and the Intracoastal Waterway, and much of the city is in FEMA flood zones. Waterfront homes often need foundations designed for high groundwater and flood loads, raised floor levels for new construction and major renovations, and careful anchorage of pool decks and outdoor structures. On the MEP side, we place electrical panels, condensing units and water heaters above the design flood elevation where required.

Salt air along the beach and the Intracoastal speeds up corrosion of steel connectors, railings and reinforcing. For balconies, canopies and exposed connections we specify corrosion-resistant materials and details that keep water from sitting on the structure.

MEP for Broward Condos and Storefronts

In Fort Lauderdale’s mid-rise and high-rise condominiums, unit renovations often include new air handlers, relocated plumbing in kitchens and baths, and electrical upgrades that have to fit the building’s existing risers and shafts. Associations may also replace rooftop or ground-level equipment, which needs new anchorage for HVHZ wind. For restaurants and bars along the beach and downtown, we design the kitchen exhaust, make-up air, grease waste and cooling for spaces that stay busy and humid year-round.

Typical Fort Lauderdale Project Types

  • Condominium repairs after building safety or milestone inspections, including balcony slabs, concrete restoration and railings.
  • Home renovations and additions in neighborhoods such as Victoria Park, Rio Vista, Coral Ridge and Colee Hammock.
  • Restaurant and retail tenant improvements on Las Olas Boulevard, in Flagler Village and in shopping centers across Broward.
  • Outdoor structures such as aluminum canopies, pergolas, screen enclosures and pool decks designed for HVHZ uplift.
  • Roof framing upgrades and rooftop equipment anchorage for commercial buildings.

On Florida’s west coast, our page on engineering for Tampa Bay projects covers local building departments and flood zones.

Areas We Serve in Broward County

We take projects throughout Broward County, including Downtown Fort Lauderdale, Las Olas, Victoria Park, Harbor Beach, Coral Ridge, Wilton Manors, Oakland Park, Lauderdale-by-the-Sea, Pompano Beach, Deerfield Beach, Hollywood, Dania Beach, Hallandale Beach, Plantation, Sunrise, Davie, Weston, Coral Springs, Pembroke Pines and Miramar. We also work in Miami-Dade, Palm Beach County and across Florida.

Florida Project Example

Our Florida project example is in Gibsonton, in Hillsborough County on the Gulf side of the state: the MEP design for a 796 sq ft retail space turned into an ice cream shop. Its HVAC design accounted for the heat given off by the refrigerated display counters. Read the project article.

What You Receive

  • Calculations and drawings for the structural or MEP scope of the project, with HVHZ wind pressures.
  • Permit documentation from an engineer.
  • Plan review responses to the City of Fort Lauderdale or another Broward department.
  • Construction-stage support for contractor questions, product substitutions and field changes.

How It Works

  1. Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
  2. We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
  3. Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
  4. Plan check and construction supportWe answer plan-check comments and support your contractor during construction.

Nearby areas: we also prepare structural and MEP drawings for projects in Miami, Hialeah and West Palm Beach.

Frequently Asked Questions

Is Fort Lauderdale in the High-Velocity Hurricane Zone?

Yes. All of Broward County is in the HVHZ, so structural design and exterior products in Fort Lauderdale must meet the HVHZ provisions of the Florida Building Code.

Where is your nearest office?

Our Florida office is at 2125 Biscayne Blvd, Ste 204, Miami, FL 33137, close to Broward County.

Can you prepare repair drawings after a building safety or milestone report?

Yes. We design structural repairs for concrete, balconies, walkways, railings and roof framing so the association or owner can permit the work the inspection report calls for.

Do windows and doors in Fort Lauderdale need a Miami-Dade NOA?

In the HVHZ, exterior products need a Miami-Dade NOA or another approval accepted for the HVHZ, and they must meet the design pressures on the engineer’s drawings.

Do you work in other Broward cities?

Yes. We work across Broward County, including Hollywood, Pompano Beach, Plantation, Davie, Coral Springs and Pembroke Pines, and throughout Florida.

What do you need from me to prepare a quote?

The project address city, the drawings or a sketch with dimensions, photos of the existing structure, any inspection report, and a short description of the work.

Sources

Call Chrome Stone
Request a Quote

Request a Quote for Fort Lauderdale

Tell us the project address and city, the type of work and what the building department is asking for.

  • Project city and state
  • Building type and proposed work
  • Required engineering disciplines
  • Architectural or existing-condition drawings available

Prefer to call? +1-279-221-5279


    We will use this address to respond to your inquiry.


    Add it if you prefer a call back.


    City only. A full property address is not needed for this first inquiry.

    Engineering support needed

    California Title 24 applies to California projects only.


    Briefly describe the building, proposed work, and any questions. Do not include passwords, payment details, or confidential documents.

    Add project stage or other details (optional)


    Leave blank if unknown.


    Tell us what the date relates to. The team will confirm feasibility after reviewing the scope.

    We use these details to review and respond to your inquiry. Read our Privacy Policy.

    While we review your project, follow Chrome Stone Structural on LinkedIn for new projects and code updates. Follow us on LinkedIn