
In California, hire a structural engineer when your project changes how the building carries loads, or when you see signs that it is no longer carrying them well. That includes removing or moving walls, adding a story or a room, cutting large new openings, converting a garage, building on a hillside, and noticing new cracks, sloping floors or earthquake damage. State law does not require an engineer for every home project: conventional wood-frame houses of up to two stories can often be built from plans without one. But any part of the design that goes beyond conventional framing, and anything the building department asks to be engineered, needs one. Here is how to tell which side of that line your project falls on.
What California Law Says
Business and Professions Code Section 5537 lets anyone prepare plans for certain simple wood-frame buildings, including single-family homes and buildings with up to four dwelling units of not more than two stories and a basement, plus their garages and similar structures. The law adds an important limit: when parts of those buildings depart from the conventional framing rules in the building code, the building official can require drawings and calculations for those parts from an architect or engineer.
In practice, many common home projects cross that line:
- Removing a bearing wall and replacing it with a beam.
- Large openings, window walls or garage doors that leave little shear wall.
- Second stories, which add weight to existing walls and foundations.
- Hillside and retaining wall construction.
- Steel beams, moment frames and engineered lumber beyond standard tables.
Commercial buildings, larger multifamily buildings and structures other than conventional wood framing are outside that exemption, and the California Building Code sets the structural design requirements for them.
When Homeowners Should Call an Engineer
Before a remodel or addition
- Removing, moving or opening up walls. See our article on load-bearing wall removal.
- Adding a second story or a room. See our article on second-story addition requirements.
- Converting a garage or building an ADU. See our article on ADU structural requirements.
- Adding heavy loads: a rooftop unit, solar panels on an older roof, a hot tub on a deck.
When you see signs of movement
- New diagonal cracks at door and window corners.
- Doors and windows that start sticking, or floors that slope.
- Cracks that reopen after patching. See our article on house foundation problems.
After an earthquake, fire or flood
Damage to chimneys, foundations, cripple walls or framing should be evaluated before repairs start, so the repair addresses the cause.
Before buying a home
If a home inspector notes structural concerns, a structural engineer can look closer at what the inspector flagged.
What a Structural Engineer Consultation Includes
A consultation is a focused review of how the building works as a system. Depending on the question, the engineer looks at:
- How loads travel from the roof to the foundation.
- Which walls are bearing walls and which are shear walls.
- How the building resists earthquake and wind forces.
- The condition of the foundation, framing and connections.
- Whether the proposed change is feasible and what it would take.
The outcome can be a short answer, a written evaluation, or the start of a design with drawings and calculations for the permit.
Structural Engineer, Architect, Designer or Contractor?
Homeowners often ask who to call first. Each plays a different role:
- Architect or building designer: lays out the spaces, the look and the code items such as exits, egress windows and energy compliance.
- Structural engineer: designs how the building carries gravity, earthquake and wind loads, and evaluates damage or movement in existing buildings.
- MEP engineer: designs the mechanical, electrical and plumbing work when it goes beyond simple replacement.
- Contractor: builds the work from the approved plans.
- Home inspector: reports visible conditions during a sale and may recommend a structural evaluation.
For a remodel, the architect or designer usually leads and brings in the engineer. For a crack, a sloping floor or earthquake damage, the structural engineer is the right first call.
When a project needs structural and MEP design coordinated from the start, our article on how consulting engineers coordinate design explains how that work runs in stages.
Questions a Consultation Can Answer
- Is this wall bearing, and what would it take to remove it?
- Can the existing foundation carry a second story?
- Is this crack cosmetic, or a sign of movement?
- Can the roof carry solar panels or new equipment?
- Is the house bolted to its foundation, and are the cripple walls braced?
- Does the garage have enough wall to stay stable if the door opening gets wider?
Why Timing Matters
The earlier an engineer sees a project, the more options there are. Before the architectural layout is fixed, a beam can move, a wall can stay, or a frame can fit where it is least intrusive. After construction starts, the same change can mean demolition and a revision to the permit. Early input also helps the contractor plan the work on a complete design.
What to Prepare
- The project city, since requirements vary by building department.
- Photos of the area and of any cracks or damage.
- Existing drawings, past permits and any inspection reports.
- Your architect’s or designer’s plans, if any.
- Any plan check comments already received.
How Chrome Stone Structural Helps
We review existing conditions, answer feasibility questions and design structural work for remodels, additions, repairs and new buildings across California. See our structural engineering in California and structural and MEP engineering in Los Angeles.
Frequently Asked Questions
Does California law require a structural engineer?
It depends on the work. Conventional wood-frame homes of up to two stories can be built from plans without one, but parts that go beyond conventional framing, and anything the building department asks to be engineered, need an architect or engineer.
Do I need a structural engineer for a small remodel?
If the remodel removes or opens walls, adds load or changes the framing, it is worth asking. Cosmetic work usually does not need one.
Can a contractor replace a structural engineer?
No. A contractor builds the work; the engineer designs the structure and shows the building department that it meets the code.
When should I call an engineer about cracks?
When cracks are wide, diagonal or growing, come with sticking doors or sloping floors, or reopen after repair.
Should I hire an engineer before buying a house?
If the home inspection notes structural concerns, a structural evaluation helps you understand them before you commit.
Sources
- California Legislative Information, Business and Professions Code Section 5537
- California Building Standards Commission, Codes (California Building Code and Residential Code)
We post one project and one code or engineering note every week on LinkedIn. Follow Chrome Stone on LinkedIn