Chrome Stone Structural is a structural engineer for projects in Bakersfield, Kern County and the southern San Joaquin Valley, with MEP engineering and Title 24 energy compliance in the same team. Our engineering team prepares permit drawings for the City of Bakersfield, Kern County and the other valley building departments.
We work with homeowners, contractors, developers, property owners and business tenants, from the first sketch through construction. Our Central Valley portfolio includes a community activity hall in Fresno and a garage-to-ADU conversion, a patio cover and a restaurant tenant improvement in Madera.
Engineering Services in Bakersfield
- Residential: new homes, room additions, second stories, garage-to-ADU conversions, patio covers and opened-up floor plans.
- Commercial tenant improvements: restaurants, retail, medical and office spaces, with roof framing for new hoods and rooftop units.
- Site structures: retaining walls, block walls, steel fences and the foundations under them.
- Building systems and energy: HVAC, electrical and plumbing design plus Title 24 documentation.
Seismic Design in Kern County
Kern County has a history of large earthquakes. On July 21, 1952, the White Wolf fault south of Bakersfield produced the largest earthquake in Southern California since 1872, followed by a long series of aftershocks, some of them close to the city. Today every new building and addition is designed with ASCE 7 seismic forces calculated for the exact site, and older masonry and wood-frame buildings often need their connections and walls checked before major changes. The Garlock and San Andreas faults to the south and west add to the regional hazard.
Valley soils range from sandy river deposits along the Kern River to clay-rich ground in other parts of the county. A soils report is common for new homes, large additions and commercial foundations, and we design footings and slabs to its recommendations.
ADUs and Larger Valley Lots
California’s accessory dwelling unit laws apply in Bakersfield and the rest of Kern County, and many valley lots are wide enough for a detached backyard unit or a garage conversion with room to spare. A conversion usually means a slab check, insulated walls and ceilings, new framing where the garage door opening is closed in, and connections from the new framing to the existing roof. A detached unit needs its own foundation, lateral system and utilities. We prepare the structural design, the mechanical, electrical and plumbing layout and the energy documentation together, so the unit can be permitted as one package.
City of Bakersfield and Kern County Permits
Inside city limits, the City of Bakersfield’s Development Services Department, Building Division, handles plan review and inspections. Unincorporated areas, which include large parts of metropolitan Bakersfield such as Oildale, East Bakersfield pockets, Rosedale and Lamont, are reviewed by the Kern County Public Works Building Inspection Division. Because city and county parcels sit side by side, the same street can fall under two different departments, so we confirm the jurisdiction before preparing the drawings. Delano, Shafter, Wasco, Arvin, Tehachapi and Ridgecrest each have their own building departments as well.
Title 24 for the Southern Valley Heat
Bakersfield summers are long and hot, often with long runs of triple-digit afternoons, so cooling dominates the Title 24 energy model for homes and commercial spaces. Attic insulation, cool roofs, airtight and well-placed ducts, window performance and correctly sized heat pumps decide whether an addition or ADU complies. New homes also need a solar photovoltaic system under the energy code, and we check that the roof framing can carry it. Climate zones are assigned by ZIP code, and Kern County stretches from the valley floor to the mountains and the Mojave Desert, so we confirm the zone for each address.
Mechanical and Electrical Design for Valley Businesses
Restaurants, gyms, churches and medical suites in Bakersfield’s shopping centers need cooling equipment sized for peak afternoon heat and full occupancy, with enough outside air for the use. When a retail space becomes a restaurant, the project usually adds a hood and make-up air, a grease interceptor, more water heating and a larger electrical service. We design those systems and the roof structure that carries new units, so the mechanical, electrical, plumbing and structural sheets agree with each other.
Typical Bakersfield Project Types
- Room additions and ADUs in neighborhoods such as the Northwest, Seven Oaks, Haggin Oaks, Laurelglen and Rosedale.
- Patio covers and shade structures for outdoor living through the long summer.
- Restaurant and retail tenant improvements along Rosedale Highway, Ming Avenue, Stockdale Highway and in the city’s shopping centers.
- Remodels of older homes in Westchester, Oleander and East Bakersfield, including bearing-wall removal.
- Block walls, retaining walls and fences for homes and commercial lots around the county.
Areas We Serve in Kern County
We take projects across Bakersfield, including Downtown, Westchester, the Northwest, Seven Oaks, Southwest, Rosedale, Oildale, East Bakersfield and the Northeast, and around Kern County in Shafter, Wasco, Delano, McFarland, Arvin, Lamont, Taft, Tehachapi and Ridgecrest. Farther north we work in Tulare, Visalia, Hanford, Fresno and Madera.
Central Valley Projects
Our nearest projects are in the central valley. In Fresno, we designed the MEP systems for a 2,450 sq ft community activity hall with two split heat pumps and energy-recovery ventilators. In Madera, we provided the structural design for a garage-to-ADU conversion, a 500 sq ft attached patio cover and the Bunz & Birds restaurant, where the roof was reinforced for a kitchen hood and rooftop equipment.
Fresno, CA · MEPCommunity Activity HallMEP design for a community activity hall of about 2,450 sq ft.
Madera, CA · StructuralGarage-to-ADU Conversion and Home RenovationStructural design to convert a garage into a 1,078 sq ft, 3-bedroom ADU.
Madera, CA · StructuralBunz & Birds Restaurant Tenant ImprovementStructural design for a 1,442 sq ft quick-service restaurant tenant improvement.
Deliverables
- Engineered plans and calculations.
- Responses to plan review comments from the City of Bakersfield or Kern County.
- Construction support for contractor and inspector questions.
How It Works
- Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
- We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
- Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
- Plan check and construction supportWe answer plan-check comments and support your contractor during construction.
Nearby areas: we also prepare structural and MEP drawings for projects in Fresno and Los Angeles. Our California office is in Sacramento.
Frequently Asked Questions
Who issues building permits in Bakersfield?
The City of Bakersfield’s Development Services Building Division covers properties inside city limits. Unincorporated areas such as Oildale and Rosedale go to Kern County Public Works.
Have you worked in the Central Valley?
Yes. Our portfolio includes a community activity hall in Fresno and an ADU conversion, a patio cover and a restaurant tenant improvement in Madera.
Is earthquake design important in Bakersfield?
Yes. Kern County has active faults, including the White Wolf fault that caused the 1952 earthquake, and every new building and addition is designed for site-specific seismic forces.
Does a patio cover need an engineer?
Attached patio covers usually need a permit, and larger or roof-attached covers typically need engineered beams, posts, footings and connections.
What does Title 24 require for an addition in Bakersfield?
The addition has to meet the energy code for its climate zone, which in the valley heat means close attention to insulation, windows, ducts and cooling equipment. We prepare the forms with the design.
What do you need to quote my project?
The address, any plans or a dimensioned sketch, photos of what is there today, and a short description of the work.
Which building code applies to a Bakersfield permit in 2026?
The 2025 California Building Standards Code took effect statewide on January 1, 2026, so applications submitted on or after that date are reviewed under the 2025 building, residential and energy codes. Earlier applications generally stay under the 2022 codes. The City of Bakersfield and Kern County may add local amendments, which we check for each project.
Does an ADU in Bakersfield need fire sprinklers?
California’s ADU law says an ADU does not need fire sprinklers if the primary residence is not required to have them. If sprinklers are required for the house, the ADU may need them too.
Do you take projects outside the City of Bakersfield?
Yes. We prepare drawings for addresses across Kern County, including unincorporated areas reviewed by Kern County Public Works, and for the county’s other cities. Send us the address and we confirm which building department reviews it.