Home / Services / Riverside
Riverside, CA

Structural Engineer in Riverside, CA: Structural, MEP and Title 24

Chrome Stone Structural is a structural engineer for projects in Riverside, Riverside County and the Inland Empire, with MEP engineering and Title 24 energy compliance in the same team.

New two-story wood-frame residence in Cathedral City, California
Chrome Stone project · Cathedral City, CA

Renovating an older home or building in a wildfire zone around Riverside? Send the address and plans for structural design.

Founded 2025 · 14 years of team engineering experience · Structural, MEP and Title 24 in one team · California and Florida

  • Structural, MEP and Title 24One team for the whole permit set
  • Engineers serving California and FloridaCalculations and drawings prepared for permit review
  • Local permit drawingsPrepared for the City and County of Riverside
  • Projects across CA, FL and beyondView our projects →

Chrome Stone Structural is a structural engineer for projects in Riverside, Riverside County and the Inland Empire, with MEP engineering and Title 24 energy compliance in the same team. We prepare permit drawings for the City of Riverside, Riverside County and the other local building departments.

Our Inland Empire work includes a new two-story home in Cathedral City, a container pool with masonry retaining walls on a hillside lot in Redlands, and a steel property-line fence on an existing retaining wall in Ontario. Homeowners, builders, architects and business owners work with us through construction.

Engineering Services in Riverside

  • New homes and additions: wood-frame houses, second stories, room additions and garage-to-ADU conversions.
  • Site structures: retaining walls, pools on sloping lots, block walls and property-line fences.
  • Commercial and industrial: tenant improvements, mezzanines, steel canopies and roof reinforcement for new rooftop units.
  • MEP and Title 24: HVAC, electrical and plumbing design and energy compliance for homes and commercial spaces.

Designing for the Inland Empire

Riverside sits in one of the most seismically active parts of Southern California. The San Jacinto and Elsinore fault zones cross the county, and the San Andreas fault runs along the mountains to the north and east, so seismic forces calculated with ASCE 7 for the exact site control the lateral design of nearly every building. Santa Ana winds blowing down through the passes add another lateral load, especially on patio covers, canopies and tall fences.

Soils change sharply across the region. Hillside neighborhoods around Mount Rubidoux, Canyon Crest and the Box Springs Mountains have rock and steep grades, while valley tracts can sit on sandy alluvium or expansive clay. A geotechnical report usually sets footing sizes, retaining wall pressures and slab design for new homes and larger additions.

Older Homes Near Downtown

The Wood Streets, the neighborhoods around downtown and the older parts of Arlington have Craftsman, Spanish Revival and early ranch homes on raised wood floors or early concrete footings. Remodeling them means checking floor framing, adding foundation bolts and cripple-wall bracing where they are missing, and sizing new beams where walls are removed.

City of Riverside and Riverside County Permits

Inside city limits, plans go to the City of Riverside’s Building & Safety Division in the Community & Economic Development Department. The two agencies are separate: Riverside County’s Building & Safety Department, part of the Transportation and Land Management Agency (TLMA), issues permits only for unincorporated areas such as Home Gardens, Mead Valley, Woodcrest and parts of the Coachella Valley. Corona, Moreno Valley, Jurupa Valley, Eastvale, Norco, Perris, Temecula, Murrieta, Palm Springs and Cathedral City each run their own building departments. We check the jurisdiction for the parcel first, then set up the drawings for that department’s checklist.

Title 24 in Climate Zone 10

Riverside is the reference city for Title 24 climate zone 10, which covers much of the inland valley between the coast and the deserts. Hot, dry summers make cooling the main driver of the energy model, so attic insulation, duct location, window performance and correctly sized heat pumps decide whether an addition or ADU complies. East of the passes, the Coachella Valley is in a separate desert climate zone with even higher cooling loads. We confirm the zone by ZIP code and coordinate the energy forms with the HVAC design.

Wildfire Zones and Hillside Lots

The hills and canyons around Riverside, Norco, Corona and the Santa Ana Mountains include mapped very high fire hazard severity zones. New homes, ADUs and many additions there must follow the wildland-urban interface construction rules in Chapter 7A of the California Building Code for roofs, vents, eaves, decks and exterior walls. On sloping lots, those rules sit alongside retaining walls, stepped footings and drainage, so we design the structure and the fire-resistant details together.

Typical Riverside-Area Project Types

  • Room additions and second stories on 1950s to 1980s tract homes across Riverside, Corona and Moreno Valley.
  • Garage conversions and detached ADUs throughout the county’s single-family neighborhoods.
  • Pools, block walls and retaining walls on terraced and hillside lots.
  • Warehouse and light industrial tenant improvements in the logistics corridors along Interstate 15 and State Route 60.
  • Patio covers and shade structures designed for Santa Ana winds and inland heat.

Areas We Serve in Riverside County

We take projects across the City of Riverside, including Downtown, Wood Streets, Magnolia Center, Canyon Crest, Orangecrest, Arlington, La Sierra and Mission Grove, and throughout the county in Corona, Norco, Eastvale, Jurupa Valley, Moreno Valley, Perris, Lake Elsinore, Menifee, Temecula, Murrieta, Hemet, Banning, Palm Springs, Cathedral City, Palm Desert and Indio. We also work in San Bernardino County, including Ontario and Redlands.

Inland Empire Projects

Three projects in our portfolio are in or next to Riverside County. In Cathedral City, we engineered a new 2,023 sq ft two-story home on a compact lot, with wood shear walls detailed for wind and seismic forces. In Redlands, we designed the support pad and reinforced masonry retaining walls for a 40-foot container pool on a terraced hillside. In Ontario, we designed a 161-foot steel fence standing 8 feet above an existing retaining wall at an industrial site.

What Our Drawings Include

  • Plans and calculations from an engineer for the structural, MEP or energy scope.
  • Plan check responses to the City of Riverside, Riverside County TLMA or the city that reviews the job.
  • Support during construction for inspector and contractor questions.

How It Works

  1. Send the project detailsThe address, the city and a short description of the work, or a sketch and photos.
  2. We confirm the scope and quoteWe review what the building department will need and send you the scope and a quote.
  3. Calculations and permit drawingsWe prepare the calculations and drawings that the plan checker reviews.
  4. Plan check and construction supportWe answer plan-check comments and support your contractor during construction.

Nearby areas: we also prepare structural and MEP drawings for projects in Orange County and Los Angeles.

Frequently Asked Questions

Is my project reviewed by the City of Riverside or by Riverside County?

If the parcel is inside Riverside city limits, the City’s Building & Safety Division reviews it. Unincorporated parcels go to Riverside County TLMA Building & Safety, and other cities such as Corona and Moreno Valley have their own departments.

Which Title 24 climate zone is Riverside in?

Riverside is in climate zone 10. The Coachella Valley and other desert areas of the county are in a different, hotter zone, so we confirm the zone by ZIP code.

Have you worked in Riverside County?

Yes. We engineered a new two-story home in Cathedral City, and nearby projects include a hillside container pool in Redlands and an industrial fence in Ontario.

Do patio covers in Riverside need engineering?

Attached and freestanding patio covers usually need a permit, and many need engineered framing, footings and connections, especially where Santa Ana winds are strong.

My lot is in a fire hazard zone. What changes?

New construction and many additions must meet the Chapter 7A wildfire rules for roofs, vents, eaves, decks and exterior walls, which we build into the structural details.

How do I start?

Send the parcel address, plans or a sketch, photos of the site and any soils report, and a short description of the project.

Which building code applies to a Riverside permit in 2026?

The 2025 California Building Standards Code took effect statewide on January 1, 2026. Applications submitted on or after that date are reviewed under the 2025 codes, including the Title 24 energy standards. Earlier applications generally stay under the 2022 codes. The City of Riverside and Riverside County can add local amendments.

Can you design a pool or retaining walls on a sloped lot?

Yes. In Redlands we designed the support pad for a 40-foot container pool and the reinforced masonry retaining walls and continuous footings for the terraced grades around it. On a slope, the pool load, the walls and the footings have to be designed together.

Do you work in Cathedral City and the Coachella Valley?

Yes. We designed the structure for a new two-story home in Cathedral City, with wood shear walls detailed for wind and seismic forces. Coachella Valley cities have their own building departments, and we confirm which one reviews your address before the drawings start.

Sources

Call Chrome Stone
Request a Quote

Request a Quote for Riverside

Tell us the project address and city, the type of work and what the building department is asking for.

  • Project city and state
  • Building type and proposed work
  • Required engineering disciplines
  • Architectural or existing-condition drawings available

Prefer to call? +1-279-221-5279


    We will use this address to respond to your inquiry.


    Add it if you prefer a call back.


    City only. A full property address is not needed for this first inquiry.

    Engineering support needed

    California Title 24 applies to California projects only.


    Briefly describe the building, proposed work, and any questions. Do not include passwords, payment details, or confidential documents.

    Add project stage or other details (optional)


    Leave blank if unknown.


    Tell us what the date relates to. The team will confirm feasibility after reviewing the scope.

    We use these details to review and respond to your inquiry. Read our Privacy Policy.

    While we review your project, follow Chrome Stone Structural on LinkedIn for new projects and code updates. Follow us on LinkedIn